E6300 First try - Can my temp be right?

Allanon

Limp Gawd
Joined
Oct 31, 2001
Messages
491
System in Sig.. I haven't oc'ed in a while, and boy if its this easy now...

Don't remember how to take screenshots but, CPU-Z reports running at 456 FSB, Ram is synched at 913MHZ. NVidia monitor says CPU voltage is at 1.387 volts, memory at 2.2 volts at 4-4-4-12 timings, FSB voltage at 1.4, HT voltage at 1.45.

Temps on Nvidia monitor say 35C for Cpu, System 32C, Gpu1 62C.

Temps on Core Temp beta say around 42C.

If I up the FSB one more notch, it won't post.. Obviously my CPU temp isn't an issue..

Whats holding me back?
 
Is 42 an idle temp?

Your ram might not like the 4-4-4-12 timings over 900mhz...

Try 5-5-5-15 and see if that helps, then tighten them one by one till you find the problematic one.

I'm unstable at DDR2-1000: 4-4-4-12, but totally fine at DDR2-1000: 4-5-4-8

...
 
All in the sig.. EVGA 680i, Corsair 6400c4, Tuniq Tower...

Its confusing to me.. I am not sure if messing with voltages is the answer or that there's just going to be a limit.. 39C at idle

1.4GHZ overclock so I am not complaining, just thinking that idle temps this low mean I should have some more room to move
 
I have the same RAM and same CPU but with Asus P5B Deluxe. The memory (my sticks) won't run @ DDR2-900 at 4-4-4-12. It's not the Micron D9 version (my guess is Promos).
However, instead of manually setting the timing, I try timing "Auto" which sets my timing to 5-5-5-18-5-42-3-11-5-14. At this setting, it runs stable @ DDR2-1000 (2.15v).
Try it on your board and see how it goes. Maybe up NB voltage a little too.
Good luck.
 
Back
Top