Dynamic Multiplier in OS

godsfshrmn

Limp Gawd
Joined
Oct 15, 2005
Messages
200
I had an Asus m4a78t-e motherboard a few weeks ago and I now have a gigabyte UD3H board. With the asus board, I could change the multiplier in the bios and win7 would decrease it down to something around 8 on idle. With this gigabyte board, if the multiplier is changed, it stays there. Power options in win7 allows you to set the minimum/maximum processor state. That disappears as well when I change the multiplier in the bios. Is this a common thing? CnQ and C1E are both enabled.
 
I think in order for the multiplier to change, you're going to have to set it to "Auto" in the bios.
 
Yea that's what I'm confused about. It would work on my asus board when it wasn't on auto. I'm wondering if I have some other setting off.
 
That is all in the bios. Windows does not change your multiplier. It is intel's speedstep technology.
 
Install the latest AMD Overdrive, run it and click the green button at the top right windows. You only need to do it once and you can uninstall the program after that. I don't know why but the green button changes something with regards to CnQ, probably in the BIOS. My MSI mobo also needs this before CnQ can work with overclocking.
 
Back
Top