DX9 card + DX10 card = ?

Sovereign

2[H]4U
Joined
Mar 21, 2005
Messages
3,098
What would happen if, for more-than-two-monitors reasons, I kept a 7900GTX instead of selling it, and got a DX10-capable GeForce 9 series? Would I be able to play games in DX10 mode using the primary monitor, hooked to the GeForce 9? Or would the mere presence of a DX9-only card force me back into DX9 mode for everything?
 
if i were you I'd sell the 7900GTX to afford more than one as-top-of-the-line-as-possible cards and hook the monitors up to those two.

that being said, if you still want to do it your way, you will probably be able to play the DX10 game with the DX10 card. you will probably end up having driver issues in some realm or another when using two radically different cards though
 
I would only use the 7900GTX if I had to drive a third display (when I'm at home and I have 1x 22" and 2x 17"). Normally I only need to push two monitors.
 
I don't think it would work at all. 7-series use different drivers from the 8-series or the 9-series. No?
 
It's perfectly fine to use a 7 series with any of the later series for dual monitors. You just have to make sure the drivers support both of your cards if you using Vista (and not a bad idea on XP to avoid conflicting issues). For the latest drivers, this usually requires extracting the downloaded driver package and modifying the Forceware nv4_disp.inf by adding entries for the unsupported card. You do this by downloading a forceware driver that supports your older card and compare the inf to the inf from the latest drivers.

I recently added support for my 7600GT, 8800GT, and 8800GTS 512 into the latest 174.74 drivers. They decided to remove the nv4_NV3X sections used by most of the 7 and 8 series, so it was a little bit more work than just adding the normal two lines. I've tweaked my changes to support the 7900GTX, 8800GT, and 8800GTS 512 below.

under the section:
Code:
[NVIDIA.Mfg]
add..
Code:
%NVIDIA_G71.DEV_0290.1%  = nv4_NV3x,                 PCI\VEN_10DE&DEV_0290
%NVIDIA_G92.DEV_0600.1%  = nv4_NV3x,                 PCI\VEN_10DE&DEV_0600
%NVIDIA_G92.DEV_0611.1%  = nv4_NV3x,                 PCI\VEN_10DE&DEV_0611


and under this section:
Code:
; Localizable Strings
add..
Code:
NVIDIA_G71.DEV_0290.1  = "NVIDIA GeForce 7900 GTX"
NVIDIA_G92.DEV_0600.1  = "NVIDIA GeForce 8800 GTS 512"
NVIDIA_G92.DEV_0611.1  = "NVIDIA GeForce 8800 GT"


And then add the nv4_NV3X sections if they're missing:
Code:
[nv4_NV3x]
CopyFiles    = nv4.Miniport, nv.Display, nv4.icd, nv.Panel, nv.Help
DelFiles     = nv.oldrm, nv.delete.systemfiles
RegisterDLLs = nv.RegisterCPL

[nv4_NV3x.CoInstallers]
CopyFiles = nv.CoInstaller
AddReg    = nv_CoInstaller_AddReg
AddReg    = nv_CoInstaller_NVAppsXML_AddReg

[nv4_NV3x.SoftwareSettings]
AddReg = nv_SoftwareDeviceSettings
AddReg = nv4_icdSoftwareSettings
AddReg = nv_ControlPanelSettings
AddReg = NV3xLoadService_AddReg
AddReg = Default16BPP_AddReg
DelReg = nv_ClearRegistrySwitches

[nv4_NV3x.Services]
AddService = nv,    0x00000002, nv4_Generic_Service_Inst, nv4_EventLog_Inst
AddService = NVSvc, 0x00000000, nv_NVSVC_Inst
DelService = nvarch
DelService = nvgfx

[nv4_NV3x.GeneralConfigData]
MaximumDeviceMemoryConfiguration = 128
MaximumNumberOfDevices           = 4


Finally, you need to check that there is a section for each of the "AddReg =" parameters used in the nv4_NV3X sections above. "Default16BPP_AddReg" was the only section that I saw missing from 174.74 (which is used in the section [nv4_NV3x.SoftwareSettings] shown above), so you need to add this in there too.. If any other sections are missing, just copy them over from the older inf.
Code:
[Default16BPP_AddReg]
HKR,, "DefaultSettings.BitsPerPel",%REG_DWORD%,16
 
What would happen if, for more-than-two-monitors reasons, I kept a 7900GTX instead of selling it, and got a DX10-capable GeForce 9 series? Would I be able to play games in DX10 mode using the primary monitor, hooked to the GeForce 9? Or would the mere presence of a DX9-only card force me back into DX9 mode for everything?

I use a 7600GT and a 8800GTX on the same machine and have played World in Conflit in DX10 mode with no problems or any need to muck around any driver files. That is off course version 169.21 which does not support th 9xxx cards.

So if you want a 9xxx card -PK- info is very usefull.

The funny thing is when I looked at the BETA drivers, version 174.74 beta supports series 6,7, 8, and 9.
 
Back when the 8800's where first coming out I emailed that very question to Nvidia... the reply I got was that the 7x and 8x cards could be used together, at least to drive mult-monitors, but not any earlyer cards the the 7k's.

I was also told this was vista only.

I'll see if I can find that e-mail when I get home.
 
Back
Top