DVI Gold Cables VS Normal DVI Cables

P4rD0nM3

[H]ard|Gawd
Joined
Jun 5, 2007
Messages
1,544
Is there really a big difference? Both my video card and LCD monitor has a DVI connector and right now I'm only using a DVI/VGA converter on one side (Video Card) and the connection to my lcd is just from a VGA.

So just wondering...what would be the difference if I try to buy a DVI-DVI cable instead of DVI converter-VGA-VGA cable?

Right now it's like this:

Video Card - > DVI Converter -> VGA cable -> VGA Cable -> LCD.

Should it be like:

Video Card -> DVI Cable -> DVI Cable -> LCD.

And what's the difference if it's gold plated or whatever. Will my eye be actually able to see the difference?

Last but not the least...where can I buy those DVI/DVI cables, thanks.
 
did Best Buy try to force sell you "gold" DVI cables for $99.99? the only difference is you will have less money, that's pretty much it.

you can get pretty much any dvi cable from a local computer shop. or try newegg.com if you don't feel like leaving you home.
 
Definitely go DVI, but the gold plating is just marketing. Just buy something cheap and generic.
 
A digital signal is a digital signal. Either the monitor gets it or not (unless the cable's quality was horrible in the first place). Don't waste your money on the gold plated cables. Go to monoprice.com and get your cables there.
 
ive heard over and over from many places, that gold plated crap ruins your hardware because it oxidizes or whatever. I would never recomend you use it.
 
A digital signal is a digital signal. Either the monitor gets it or not (unless the cable's quality was horrible in the first place). Don't waste your money on the gold plated cables. Go to monoprice.com and get your cables there.

Yep. I suggest just buying the cable from monoprice and save a bundle.
 
Haha, yeah I went to Bestbuy today to have a look around. So I guess I'll just buy a normal DVI/DVI cable then.

Just wondering...DVI/DVI is better than DVI.VGA/VGA.DVI? The '.' means those little white things? Adapters? is that what you call them?
 
ive heard over and over from many places, that gold plated crap ruins your hardware because it oxidizes or whatever. I would never recomend you use it.

Gold, real gold, doesn't corrode. Thats why they are used in high end connections where the connections are for the most part, permanent.
 
Haha, yeah I went to Bestbuy today to have a look around. So I guess I'll just buy a normal DVI/DVI cable then.

Just wondering...DVI/DVI is better than DVI.VGA/VGA.DVI? The '.' means those little white things? Adapters? is that what you call them?

I'm not 100% sure on this, but I think that if you do the second option, the signal sent over the cable will be analog, meaning you will lose the benefits of DVI.
 
ive heard over and over from many places, that gold plated crap ruins your hardware because it oxidizes or whatever. I would never recomend you use it.

Umm, no, it's the other way around. Gold-plating prevents corrosion, as gold is not very reactive. Unplated connections may corrode after decades of use. They will not, however, make the signal any better.
 
I see I see. Just wondering since I plan on buying a DVI/DVI cable anyway.

Thanks.
 
It isn't completely the same what cable you have. I have a HP LP3065 monitor with 2560 x 1600 resolution and I had random problems where the monitor wouldn't go on when booting to windows or when I changed resolution from under 1280x800 (single link) to over 1280x800 (dual link). The led just flashed like it does when unsupported resolution or refresh rate is being forced. So I changed the cable that came with the monitor to a bit more expensive one and all random problems were gone. But I do suppose that in most cases it's pretty much all the same..
 
Umm, no, it's the other way around. Gold-plating prevents corrosion, as gold is not very reactive. Unplated connections may corrode after decades of use. They will not, however, make the signal any better.

The caveat, of course, is that when using analog signals (NOT digital, or DVI in this case), cable quality does definitely, very much, make a HUGE difference in output quality.

But that's rather the nature of analog. And why we all hate it. :p

It isn't completely the same what cable you have. I have a HP LP3065 monitor with 2560 x 1600 resolution and I had random problems where the monitor wouldn't go on when booting to windows or when I changed resolution from under 1280x800 (single link) to over 1280x800 (dual link). The led just flashed like it does when unsupported resolution or refresh rate is being forced. So I changed the cable that came with the monitor to a bit more expensive one and all random problems were gone. But I do suppose that in most cases it's pretty much all the same..

Really??

With DVI???

Those must have been some seriously questionable cables, then! It takes a hell of a lot of effort to degrade a digital signal from a usable state over that short a distance.
 
Really??

With DVI???

Those must have been some seriously questionable cables, then! It takes a hell of a lot of effort to degrade a digital signal from a usable state over that short a distance.

With DVI, yes. Thing is, nvidia control panel showed the real refresh rate being 59.86hz, which obviously was close to the lower limit the monitor/cable was capable of handling. I tried forcing 59.8, result = no signal. 60.0 worked fine, so did 59.9. BUT with the new cable, it worked as low as 59.1, and 59.0 caused no signal. So it seems I got more headroom with the refresh rate with the new cable. The monitor does seem rather picky for refresh rates.
 
Well how long of a cable do you need? You don't need a dual link cable with that monitor.
 
If more people knew about www.monoprice.com (the choice of the guys at avsforum) then BB and such places couldn't get away with ripping people off for cables and such.;)
 
My neighbor dropped $10k on his HT from Bestbuy buying his PJ, receiver, speakers, player from there. Excluding Bose, I found everything he bought at ~45% less. The Bose speakers I found a better equivlant at 1/3 the cost. His counter argument was "well, I'll get really good support". Don't know how he will ever get $5k in support. :confused:

The truth is 95% of what B&M stores sell is hype and then fear. Why? There is only so many ways you can do X. As for cables...this is where the stores screw you heavy. They spend a lot of time "hyping you up" about the TV, receivers, and speakers. They might even get you a good "price". Then when you think you are just about done they say something fairly horrible like "with buying all this expensive and nice equipment don't you think you should get good cables to get the most out of yoru investment?" So they load on the fear and land up selling you $100's in cables that cost them 10% of that to stock it. The problem with cables is you can't just look at it and know what is good. So they take your lack of knowledge coupled with non-obvious quality and empty your wallet with high margin items.

If you would take the time in your life buy every cable from places like monoprice, in the long run...even with a few bad cables, you will be $100's if not $1000's of dollars ahead compared to buying Monster cables and filth like it. The same goes for extended warranties. If you would take the time to take even 1/2 the cost of a warranty and put it an account when you buy it...you should have way more than enough cash to replace anything that breaks.
 
A digital signal is a digital signal. Either the monitor gets it or not (unless the cable's quality was horrible in the first place).
Not quite. Remember that the transmission of digital signals is still dependent on the factor of time. If a digital signal isn't accepted at the input end in sync, the stream can become less interpretable, but not necessarily uninterpretable. With both video and audio, it's still not that big a deal unless it's mission-critical.

Excessively cheap digital cables can cause some problems, but you'd really have to do your research to find the worst one and exploit it under the worst case scenario to see, or even measure, any difference. I couldn't even guess as to where you could buy such cables.

To the OP: You can't possibly imagine how much money Best Buy and the like make on these Jesus cables. Odds are that if you see a $99 price tag, the retailer is going to end up making around $75-80 out of it. If you're worried about Best Buy's precarious financial situation, by all means go out and buy some Monster Cable. If you're worried about your own precarious financial situation, and you're keen on saving the world, check out Monoprice.
 
If more people knew about www.monoprice.com (the choice of the guys at avsforum) then BB and such places couldn't get away with ripping people off for cables and such.;)

It's not BB's fault; it's Monster Cable. They're the ones making the cables and setting outrageous MSRPs, while convincing customers to pay for them with claims like "0.0001% signal loss means a better picture!" You can buy overpriced Monster Cables online, too.

BB does overprice a lot of their items, however.

Go there and argue warmth or cold sounding receivers too

Actually, that one is true. Different amplifying equipment will produce different sound. In most cases, however, you'll need a really good ear to hear any difference.

Heck, if I had enough money, I would hand out free $200 audio systems to everyone using or considering using Bose to allow them to compare the two, just to put Bose out of business. Same thing with Monster Cable. I would run television ads tellings people about how they can save by using online stores like Newegg and Monoprice instead of BB and CC.

But, I don't have enough money to do that, so it's only a dream. :(
 
It's not BB's fault; it's Monster Cable. They're the ones making the cables and setting outrageous MSRPs, while convincing customers to pay for them with claims like "0.0001% signal loss means a better picture!" You can buy overpriced Monster Cables online, too.

BB does overprice a lot of their items, however.

BB sells the cables! Therefore it is their fault...not Monsters. Monster is just brilliant to realize they found a conduit to screw the average consumer. BB profits along with them. BB is at fault most definately.
 
how is it a "fault"? BB is a retailer, they will sell what makes them money. Wether it works better or not is a scientific discussion, however from a common sense point of view "gold plated" cables are not worth the rediculous extra expense, unless you have alot of money and have nothing to do with it.

P.S , BB does overprice some items, not too long ago I found a 100 spindle of DVD-R's for $60 CDN. Hooray.
 
Ok my LCD has DVI-D and my 8800 has DVI-I. I just ordered a DVI-D cable from mono. Thanks guys! I saved it in my bookmarks.

Oh wait...which one would suit me?

I'll be watching 1080p movies. 24AWG or 28AWG. And at most it would be around 5-10 feet.

Doesn't matter right? I just picked 24AWG.
 
however from a common sense point of view "gold plated" cables are not worth the rediculous extra expense
Gold plating is relatively inexpensive in comparison to the rest of the interconnect (the most expensive part of most any interconnect is either the fiber optic cable in optical cables or the copper in copper stranded cabling). Monster Cable (Best Buy) does not charge excessively because of the gold plating, but because of the so-called "science" and "allure" of the interconnect.

OP: A higher gauge is better, but I have no idea if this will actually impact you at all. It's like shooting fish in a barrel, so just pick whatever's cheaper/better looking/fun to eat.
 
Higher gauge, lower AWG number, larger diameter. All things being equal, 24 is better than 28.
 
Ok my LCD has DVI-D and my 8800 has DVI-I. I just ordered a DVI-D cable from mono. Thanks guys! I saved it in my bookmarks.

Oh wait...which one would suit me?

I'll be watching 1080p movies. 24AWG or 28AWG. And at most it would be around 5-10 feet.

Doesn't matter right? I just picked 24AWG.

DVI-D means a digital signal over DVI, whch is normal.

DVI-I means a digital or analog signal over DVI, depending on your display and whether or not you're using those VGA adapters.

Your display has DVI-D, and your card has DVI-I, which support DVI-D. Therefore, with a direct connection you will see the digital benefits of DVI.

As for the guage, you need the "higher" (lower number) guage for longer cable runs. 5-10 feet, it shouldn't matter.

BB sells the cables! Therefore it is their fault...not Monsters. Monster is just brilliant to realize they found a conduit to screw the average consumer. BB profits along with them. BB is at fault most definately

I guess it is dishonest to knowingly sell something that is no better than much cheaper alternatives, so that's partially BBs fault. Still, it's not like BB is buying wholesale cables from wherever Monoprice gets them and jacking up the price for resale. Monster Cable is doing that and selling the now-overpriced cables to BB, who then overprices them even more so they can make a profit.
 
My neighbor dropped $10k on his HT from Bestbuy buying his PJ, receiver, speakers, player from there. Excluding Bose, I found everything he bought at ~45% less. The Bose speakers I found a better equivlant at 1/3 the cost. His counter argument was "well, I'll get really good support". Don't know how he will ever get $5k in support. :confused:

The truth is 95% of what B&M stores sell is hype and then fear. Why? There is only so many ways you can do X. As for cables...this is where the stores screw you heavy. They spend a lot of time "hyping you up" about the TV, receivers, and speakers. They might even get you a good "price". Then when you think you are just about done they say something fairly horrible like "with buying all this expensive and nice equipment don't you think you should get good cables to get the most out of yoru investment?" So they load on the fear and land up selling you $100's in cables that cost them 10% of that to stock it. The problem with cables is you can't just look at it and know what is good. So they take your lack of knowledge coupled with non-obvious quality and empty your wallet with high margin items.

If you would take the time in your life buy every cable from places like monoprice, in the long run...even with a few bad cables, you will be $100's if not $1000's of dollars ahead compared to buying Monster cables and filth like it. The same goes for extended warranties. If you would take the time to take even 1/2 the cost of a warranty and put it an account when you buy it...you should have way more than enough cash to replace anything that breaks.

Amen to all of that. I can mainly agree with this because I myself used to work at a retail store. I remember when I punched in the product codes for the cables into the system and compared them to the shelf price, I was like "Lol poor customers".

The only thing that I slightly disagree on is the warranties. I do think that generally they are unnecessary accept on a few things. One thing is laptops. Now I know that the cost of the warranty for a laptop is rather high and it usually only covers like 2 or 3 years it's still mostly worth it to get it (unless you buy some piece of crap that you only plan on keeping for a year). The only reason it is good to get the warranties on those is when something happens to the parts that can't easily or cheaply be replaced (like motherboard ranging for $500 to $1000 or monitor). Now even if you are lucky enough to find somebody that actually knows how to work on laptops and will do it cheap it will still usually end up costing you more than getting a warranty. Another thing to consider this on is LCD and Plasma TV's. At the retail store I noticed that just about every brand of TV suffered the issue of having inputs go bad on them which required a swap of the circuit board (which cost way more than the warranty). So on that I would recommend. On anything else ever bought at a retail store though I would say neigh to those warranties. Hell working at a retail store is the reason I buy everything at newegg.com :D
 
Back
Top