DSL and Network

gsurfman

n00b
Joined
Jul 27, 2006
Messages
5
Hello to all:

I have finally gotten DSL with a Westell modem. My question is this:



I have the modem set to “Bridge Ethernet” connected to a router. I have 5

computers (2 are Linux). One of them is a WIndwos 2000 server (DNS,AD) How

do I set up the IP address for each machine. The router is set for DHCP

which I do not want. The DSL modem's local IP is 192.168.1.254 and the

router is 192.168.1.150. So, my server is static at
IP: 192.168.1.100
mask 255.255.255.0
DNS 192.168.1.100

Gateway - this is my question is it the routers IP or modem

So basically the rest of the computers will be like the server except the
IP's will be 192.168.1.1 thru 192.168.1.5 Again, I want to disable
DHCP in the router and assign the 5 machines static IP's but I am not
sure how to configure the gateway since this is my way out to the Internet.
So currently my router is still configured for DHCP so when I ipconfig /all on a windows client it returns
This:
IP: 192.168.1.1
DHCP: 192.168.150
Gateway: 192.168.150
DNS: 192.168.1.150
This DHCP from the router gets to the internet but this is not what I want.
When I tried to statically assign the IP settings with the same above, I was not able to get out to the Internet but the DHCP does. See I don’t want the router to assign IP’s because of the server which is my local DNS.

Thank you in advance
 
Ok, first thing is put your gateway as your router's ip.

Open up Network Connections under the start menu. Right click on the NIC interface and select properties. Then a new window should appear. Scroll to TCP/IP and select properties. There should be options to obtain ip addresses automatically or manually. Select manually, then put in the address you want for your machine. You can either put in your isps dns servers or your own (which is the machine running active directory)

One other thing you need to make sure is that your router is cloning the mac address of your dsl modem (not your pc) when the westell is in bridged mode or it will not work. Make sure to disable the 6100's dhcp under the private lan menu

Make sure your router is set to dhcp (not ppoe) so that it will grab the ip from your modem. You can also disable your routers dhcp. I manually set my machines ip addresses but I leave a small range running just in case something does mess up

You can setup your dns either as your internal dns servers (which in this case would be th server running active directory) or your isp's dns servers.
 
Ok, so in TCP/IP properties I would set this (Example)
IP 192.168.1.1
Mask 255.255.255.0
Gateway 192.168.1.150 (Routers IP)
DNS: 192.168.1.100 (My internal AD Server/DNS)
I don't know what Bellsouths DNS is so I couldn't add it to secondary DNS

On the router, it is set to obtain DHCP however I read on "dslreports.com" that setting up any other thing besides PPPoE will not work. I will disable DHCP in the modem as well as the router for the internal network and we should be good to go. This is what I gathered from your post - and thanks for the info !

goalied00d said:
Ok, first thing is put your gateway as your router's ip.

Open up Network Connections under the start menu. Right click on the NIC interface and select properties. Then a new window should appear. Scroll to TCP/IP and select properties. There should be options to obtain ip addresses automatically or manually. Select manually, then put in the address you want for your machine. You can either put in your isps dns servers or your own (which is the machine running active directory)

One other thing you need to make sure is that your router is cloning the mac address of your dsl modem (not your pc) when the westell is in bridged mode or it will not work. Make sure to disable the 6100's dhcp under the private lan menu

Make sure your router is set to dhcp (not ppoe) so that it will grab the ip from your modem. You can also disable your routers dhcp. I manually set my machines ip addresses but I leave a small range running just in case something does mess up

You can setup your dns either as your internal dns servers (which in this case would be th server running active directory) or your isp's dns servers.
 
Thought you were using verizon for a sec.

I have a similar setup at my home. Only difference being I am on verizon, and not bellsouth.
 
Thanks a bunch ! I got it to work. The DSL internal IP is 192.168.1.254 and the router is 192.168.1.150. I tried the routers IP and it didn't work BUT, I put in the modem's IP and bingo well at least for the Linux boxes. I am having other issues with the windows machines which I need to resolve (having problems joing a win 2k machine to the domain)

Thanks !

G
goalied00d said:
Thought you were using verizon for a sec.

I have a similar setup at my home. Only difference being I am on verizon, and not bellsouth.
 
Back
Top