dothan in p4 mobo

ryuji

2[H]4U
Joined
Jun 11, 2004
Messages
3,115
will a generic no options bios'ed laptop mobo be able to safely run a dothan... this northwood p4 2.8 is sucking too much power
 
Are you trying to put a Dothan in a motherboard designed for P4s? If so, then that's not gonna work. Although the chipset can run the Dothan fine, the pin outs are different, yeah? So if you pop a Dothan in there, you will most likely kill something.
 
if powerleap decided to make an adapter for that...that would be grrreeeaaattt. :D
 
i think my friend took what he said was a dothan out of a laptop and put it in his ic7 and it ran quite well....4.2 ghtz well... when stock is 1.somthing i belive

could be because the ic7 kicks ass...
 
ryuji said:
i think my friend took what he said was a dothan out of a laptop and put it in his ic7 and it ran quite well....4.2 ghtz well... when stock is 1.somthing i belive

could be because the ic7 kicks ass...

the current fastest dothan runs at 2ghz, your friend lies.
 
maybe it isnt a dothan then.. i seen it first hand run at 4.2 tho he also says dothan owns the a64 fx-53 939 when overclocked
 
dothan's are very fast, easily faster than any amd or intel chip. but your friend must have had a p4, proboboly a 30cap 3.0 or some prescott.

im sorry about before, i didnt mean to sound like a jerk but the only people ive seen that have overclocked dothans or any Pentium M's are people with notebooks and they modify the bottom of the laptop with big heatsinks.
 
Back
Top