Does the nForce 4 Ultra/Sli support Socket 940?

Joined
Nov 11, 2004
Messages
814
From what i read it says it supports the Amd 940 socket cpus ( the plain nForce 4 doesn't but the Ultra/Sli can )

So does anybody know whether they will be releasing a sockt 940 nForce 4 motherboard ????

:confused:


Source: http://www.theinquirer.net/?article=19131

Ok so i found out from the Inquirer, but i also read this somewhere else too.
 
i read somewhere about a dual opteron sli :drool:


I would say within a month of the first nforce4's you would probabaly see one, but thats strictly guessing
 
.... i mean a Uni-Processor motherboard for an Amd Fx-53 Socket 940 ..... any updates on this ? :confused:

Got to be something better than an Asus SK8N ;)
 
All of the Opteron/Athlon 64/Athlon FX chipsets can support all of the Hammer CPUs. The chipset just has an HT Link to the CPU (or the CPU 0 in a multisocket motherboard) which is what all of the A64/etc chips use.

The motherboard makers just decide which of the three sockets they can make a profit by supporting. It is likely that a workstation grade socket 940 board will eventually be made using the Nforce4 SLI chipset, but only when the MB makers see a potential for profit.
 
Moogle Stiltzkin said:
So the cances of getting a feature rich home user/gamers socket 940 motherboard is not gonna happen is it :( ?

Not likely, but a high-end workstation style NF4 SLI board might be possible.
 
Yeah, why the heck would you want 940 for "home users"? Workstation-style (as in DUAL 940s) makes sense, but single 940 is just st00pid for the rest of us.

(And if you're doing anything that needs ECC and SLI, well, if you're going to go single-processor, I think you're nuts.)
 
Before the socket 939 came out what was there....

The Fx-53 socket 940 .... duh.

So i got it before the 939 socket came out :p

Athlon64 FX-53 (939-Pin) - The Athlon64 FX-53 in a Socket-939 form factor is AMD's top of the line gaming chip - but is also the most expensive 2.4 GHz Athlon64 processor. The Athlon64 FX-53 benefits from having a dual channel DDR-400 interface, supporting standard DDR-400 memory, and having a full 1MB of L2 cache. While it still runs at the same 2.4 GHz clock rates as the two previously mentioned Hammer processors, the FX-53's cache and memory features will help it outperform these other chips in most every benchmark, albeit by slim margins.

The new Socket-939 Athlon64 FX-53 will outperform the 940-pin Athlon64 FX-53 in two respects. The 939-pin is not hampered by slower (and costlier) ECC/Registered memory like the 940-pin version is. The Socket-939 version can also take advantage of the new VIA K8T800 Pro and nForce3 250 platforms, which are tuned for gamers. The Socket-940 version will still be tied to the original K8T800 and nForce3 150 platforms. If you're a gamer with a ton of cash to blow, this will be the chip you'll want. It's got the best performance and it's on AMD's brand new socket design, so there will be plenty of upgrade options in the future.

Athlon64 FX-53 (940-Pin) - The FX-53 in a Socket-940 pin version was has the same features as the 939-pin variant (1MB L2 cache, dual channel DDR-400), but is tied to a platform which no longer is focusing on gamers anymore. The Socket-940 form factor will continue to be updated as new Opteron processors are released, but motherboard makers will be focusing on 939 for all of their upcoming "Enthusiast" class motherboards. Thus, if you're a gamer or workstation user, you'll want to stick with the 939-pin version instead for any new system purchase. The 940-pin FX-53 is still on the market for those who have 940-pin motherboards and want to upgrade to the fastest chip available (and believe us, this chip is very fast), but as the 939-pin version makes it to market, we'll see supplies of the 940-pin dry up and fade away.

As happened to me so now i'm stuck in this predicament :mad:
 
Yeah, eveything looks like the 939 socket is going to get the goodies and then someone may break down and roll out a 940 mobo. I wouldn't be surprised if Abit, DFI, and/or Asus come out with something for the 940 based on the Nforce4 chipset for workstations. I can only imganie ppl that would be able to afford dual Quadro FX cards in the box when they go for $1000+
 
this is why, every single time a new generation of stuff comes rolling out the door all at once. i just wait and bide my time, untill they all figure out exactly how their going to do their shit.

cause whenever new stuff comes out, it almost never looks like it did when it first came out after its had a chance to mature.
 
holy cow look at that monster




all i want is a good 754 board so i can get rid of this asus. nothing wrong with it but i want better overclocking.
that and the fact that the 6800's have issues with the nforce3 250 chipsets.
thats funny .. video card and chipset made by the same people and they dont even play well together.
 
The Athlon 64 FX-51 and FX-53 are the ONLY non-Opteron processors for Socket 940 – ALL future Athlon 64 FX processors will be released for Socket 939(the FX-53 is already available in a Socket 939 version).

x_x;
 
Read the thread and click on some of those pretty yellow links. ;)

lestat: You sure it's not your power supply? There are no general conflicts between any (modern) graphics card and any (modern) chipset. :confused:

That aside, just go 939, 754's a dead end.
 
i dont have a problem with my 6800 on these nforce boards im pulling some great benches ex: 23,839 3dmark 2001 ;)
 
Back
Top