Does the LSI 9280-4i4e have IT Mode - HBA

KapsZ28

2[H]4U
Joined
May 29, 2009
Messages
2,114
I've never actually done this before but I have seen people talk about it with LSI RAID controllers. Basically I already have this controller in a custom built Supermicro SAN that I want to change the OS to use ZFS. It seems that you shouldn't use RAID with ZFS, so I want to see if this adapter can be flash into "IT Mode" I believe it is called to just act as an HBA?

I didn't see to find anything for this particular model and nothing on LSI's website mentioned it also being HBA. At least not that I saw. So has anyone done it with this model and how do I go about doing it?
 
So if I am going to install FreeNAS, is my best option to disable all the caching and setup each drive as its own RAID 0? Kind of sucks as there are over 30 hard drives.
 
Eh, I guess it would just be better to replace the current card with the LSI 9207-4i4e.
 
I wonder if raid0 means that the card will write additional stuff on the disk? Sometimes hw cards do that. And if it does, ZFS will not like it.

Can you just get a cheap IBM M1015 card on the ebay for $80?
 
Yeah, it is not worth the risk so I am just going to order a LSI 9207-4i4e.
 
get a perc h310 or perc h200 on ebay. ive seen them for 60$ free shipping. and they will do SAS and sata 6gb.
 
Using raid0 on it, will cause it to add additional data to the disks.

This is NOT CAUSE any problems with zfs, zfs couldn't care less about that.

The problem comes into place when you need to replace a disk, and need to setup the new disk in a raid0, and unless you have management tools that can do it in the os, you would have to reboot into the raid bios.

Your support as far as drivers for megaraid vs IT mode is also different.
 
Ah. Good to know. I generally manage the raid configuration with MegaCLI, but with over 30 drives and the ability to add 40 more, I would rather just get an actual HBA and ditch the RAID card.
 
Back
Top