Does the dfi nf4 sli dr undervolt the memory?

Rasha

Limp Gawd
Joined
Jun 4, 2003
Messages
395
Does my mb undervolt the ram? the reason im asking is, my first set of ram was bad, but beside that point it would not boot until i uped the voltage to 2.8, i now have a good set of ram, and same thing 2.8 its the twinmos ch5 stuff.. mcp400 or something like that. bdw even if it does undervolt it deosn't really matter, im just curius, this mb is great all around
 
idk, mine doesn't seem to. Run that smart guardian program that came on the cd and see waht your vdimm does.
 
nope. if yours does, flash 414-2 bios and enable the +.03v option beneath dram voltage.

very truly yours,
politenessman
 
Nope but normally U need 2.7-2.8 to be stable.. Why? dunno but it takes u further :D and some if it migt depend on what U have on the 3.3V from your PSU
 
Thanks for the feedback guys, i've always set my ram voltage to auto because until now i just overclocked the crap out of my cpu.. but my last cpu was an unlocked socket a.
Now i have a new problem
i just got 2 brand new memory stix do to the fact that my 1st 2 where compleatly defective, i didn't even get a chance to oc them. These new too.. i had issues installing, i bumped voltage to 2.8 it installed then i was like wth just because of my last problem

ISSUE IS:
i ran the windows memory diagnostic tool
each stick passes all tests by themselves, however , when i pair them up they fail one of the tests, i look up which one when i get back to the house, its one that you hafta hit t to go to extended testing and it ends with a 6
its twinmos ddr400, the same stuff ocz makes their 3.3@222 with
dfi mb and venice proc and 510sli pcp&c
Any clues to why on EARTH they would fail together? also im using the most current non beta bios on dfi north american website
 
Okay hears latest update:
its stock timings:
however, if i stick both sticks on the 1st two slots, which bumps it down to ddr333 it works fine, it seems like if i put it in either of the two upper slots it gets fucked up... or it worked cuz it was ddr333, however since each stick worked bythemselves in slots1/2 i think its safe to assume that its either mb or memory controller, im trying a little more voltage seeing if that helps
 
Back
Top