Does RAID 1 use any special formatting on X SATA/RAID controller?

bleed3r

Limp Gawd
Joined
Jul 30, 2003
Messages
391
I’m planning on setting up two 2*1TB RAID 1 arrays, but I want to make sure I can take any of the drives out and read it from any other computer’s SATA port (or a SATA to USB cable). I was googling and read some forum posts suggesting different controllers might use special formatting, such that it would only be readable exclusively from that paricular controller. I do not want this! Sounds like an un-feature.

Wondering if anyone has any experience with this or know controllers that will just mirror the drives. It would make sense to me if it did just this, and you could also take any single HDD with data on it and simply add another to build the array.

I was looking at Highpoint Rocketraid 2300 4 Channel SATA2 RAID Controller Card PCI-E1X
I’d also be interested in a newer mobo with at least 6 SATA ports if I can be sure there’s no weird formatting business with the built-in controller.

Cheers.
 
just don't use the AMD sb600 raid controller for raid 1, there is not an option to rebuild a drive that dropped out which means u have to backup the data and recreate the array

now im using the SiI3132 for raid 1 and i can pull a drive, write a few things to the other drive still connected and then put the drive back in and tell it to rebuild.
 
Back
Top