Does AGP 8x make a difference?

  • Thread starter Deleted member 79192
  • Start date
D

Deleted member 79192

Guest
Compared to AGP 4x, would a video card running at AGP 8x be comparably faster than one running at AGP 4x? I recently upgraded to a much better video card, the Geforce4 MX 440. It utalizes AGP 8x, but my mobo doesn't. Is it worth getting an AGP 8x mobo when I upgrade my CPU to get the most performance out of my system?
 
No, the difference is less than 5%

Your video card is getting old and is just a poor performer.
 
with that video card it isnt going to matter but with my 9800pro I noticed much smoother looking graphics not really faster though as far as fps dont understand it myself maybe its just the games I play suck as far as engines go especially nfs underground I get 60fps no matter what I do lol
 
Spend a ton, and get burnt down. I'm used to it. I upgraded to a Geforce4 MX440 from an ATI Rage Pro 8MB. Big difference, lol!
 
what kind of motherboard/cpu do you have currently, and what do you want to upgrade to?
 
switching from 8x to 4x AGP made no perceivable difference on my system. even benchmarks were about the same too (within a margin of error).

I would say its NOT worth it to upgrade your motherboard.

Just wait a few months or until the fall and do a major upgrade (motherboard and CPU) when all the cool new features are out (PCI express, and more 64bit cpu options).
 
I am doing my big upgrade right now, since I've finally saved up enough money... I am only 14, so I can't get enough money for any 64-bit cpu/motherboard. I currently have an ASUS CUSL2-C mobo, with a Pentium 3 Coppermine CPU, running at 750 MHrz. My upgrade is to a DFI NFII mobo, with an AMD Athlon XP 2600+.
 
Sounds good Matt!

Good Luck with your new rig!

You might want to consider an XP2400+\2500+ Mobile as they're unlocked and will OC better than the 2600+ Even the Barton 2500+ will OC quite well on that board, you should get 200FSB x 11 for 2.2Ghz (XP3200+) easily with some decent memory and PSU.

Regards, Szandor
 
Interesting... I recently helped a friend of mine upgrade his motherboard and he went from 4x to 8x AGP, and he actually had a 5700 Ultra before he changed MB, and the only difference in the rest of his machine was an 865 chipset instead of 845, and his framerates almost tripled on most FPS games.
 
My dad sets up the BIOS stuff. He hates overclocking, but maybe I can convince him to let me overclock the Barton a bit when I get it, since it is my CPU. I got the p3 750 as a B-Day gift...
 
You said I should go with a 200 MHrz FSB. The 2500+ and 2600+ only have 166 MHrz FSBs though... You sure they'll overclock that high?
 
Hey Matt!

You willl overclock to ~200FSB or higher.

The Barton 2500+ has a default multi of 11X and default FSB of 166, therefore 166FSB x 11 = 1826mhz (1.83Ghz) which is what it operates at default settings. Because the Barton 2500+ has a locked multi the only choice you have to OC is raise the FSB, these newer locked Bartons OC quite well with very little if any additional VCore needed to reach 200FSB X 11 = 2200mhz (2.2Ghz) which is the operating speed of the XP3200+. As long as you have decent memory, HSF and PSU it is quite easy & safe to reach these speeds.

The Mobile 2400+\2500+ chips have an unlocked multi so it opens up a whole new area of options for your OCs as you can lower your multi but raise your FSB even higher. I think from the sounds of it you'd be best getting your Dad to let you get a Barton 2500+ and try some OCing with that. Have him read some of this thread or read some of these articles so he realizes how simple and safe OCing can be if done properly.

Good Luck!

Regards, Szandor

Heres some articles from www.overclockers.com explaining overclocking, read them over and then show them to your Dad and explain it to him and maybe he'll let you try it.

http://63.74.115.230/articles740/

http://63.74.115.230/tips1039/

http://63.74.115.230/tips1050/

http://63.74.115.230/articles704/

Edit: All this is dependant on whether your Motherboard supports OCing and what settings it offers for accomplishing it. What Motherboard are you planning to use? What brand and speed on memory do you have? What are the specs of your PSU? Amps\rail & 3.3V + 5.0V rail wattage output? You should find this info on a label stuck to the side of your PSU.
 
Wow, thnx for all the info! I am not allowed to open up my comp, so the power supply will have to wait. I am planning on getting a 512 MB DDR memory module, made by PNY, running at 400MHrz max (PC3200/DDR400). A FSB overclock will easily fit into that! Thia is all fitting perfectly together!

Motherboard: DFI - NFII Ultra AL
it supports CPUs with FSB speeds of 200 MHrz, so the FSB overclock should be accepted. It also handles memory at up to 400 MHrz. Here is a link to it on TigerDirect.ca: http://www.tigerdirect.ca/applicati...ils.asp?EdpNo=622349&Sku=D452-2013&CatId=1347
 
Hey Matt!

That DFI is a sweet board, you'll be fine.

Have your Dad check that PSU sometime. Make sure you have at least 15amps on the 12V rail and a 3.3V + 5.0V rail output of ~200watts, if so you should be OK.

Check to see if you can buy Buffalo Tech PC3200 with Winbond CH-5 chips, its good quality budget RAM and probably costs about the same as the PNY but OCs very well, mine runs up to 220FSB on the Auto VDimm setting. This is what they look like:

http://www.newegg.com/app/Showimage.asp?image=20-150-563-01.JPG

I don't think Newegg ships to Canada but these guys might:

http://www.tblmemory.com/

Check out the Forums over at http://www.modthebox.com/ as there based up your way, someone might know where to get the Buffalo RAM, Corsair Value Select PC3200 would be another good budget option.

Have you ordered your motherboard yet?

Good Luck!

Regards, Szandor
 
Hopefully, my motherboard, CPU, CPU fan, and RAM will all be ordered at the end of the day. I'm ordering from TigerDirect.ca (they ship to Canada, FREE if order is over $200 CAD!). I plan to get the Corsair Value Select, since a new PC3200 512MB memoery module just popped into their stock, for less than the PNY module! As for my PSU, it is getting old anyway. After my big upgrade, I'll be getting a new PSU to make room for my SATA harddrive upgrade in the future. Can old PSUs supply SATA harddrives with power even if they don't have native SATA power wires? I'm guessing they'd have special adapter cables though.
 
Yeah they make adaptors for SATA drives but most newer PSUs these days include them integrated.

The Corsair Value RAM should work well, I've heard of too many people having issues with PNY.

Did you order the Barton 2500+ or 2600+?

Regards, Szandor
 
Well, it looks like I won't even be getting this stuff. I had a conversation with my parents. They want me tog et a whole computer, instead of these. They won't let me install them myself. They won't even look at what I have chosen, and are bent on the idea of me getting a whole computer, just so my dad won't have to put the stuff in. I just want to get these certain parts though! I don't need a whole new computer!
 
Back
Top