• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Do I need a better PSU?

L

Link

Gawd
Joined
Jul 28, 2002
Messages
699
In addition to the components listed in my sig, I also have one DVD-RW drive, one BR/HD-DVD combo drive and five 120mm fans.

All of these are running on NeoHE 550, but I've noticed recently that 5V and 12V rails degrading to 4.92V and 11.93V. I think my system needs a better PSU. What do you guys think? What do you recommend? I'll need a PSU with long 8 pin connector for P182 case which has PSU compartment at the bottom of the case.

I don't want to spend too much $$, either.
 
What were the voltage reading before? Also, what do you use to check those voltages?
 
They used to be slightly above 5V and 12V, and the readings are from Everest Ultimate through mobo sensor.
 
I would get a newer PS to replace that Antec 550 if that is the case. I would get something like a Corsair HX620 modular with 50A on the +12v
 
You are well within spec on the voltages. IIRC, the NeoHE's are made by Seasonic.

Also, a valtagemeter would be much more accurate than Everest. ;)
 
You must log in or register to reply here.
Back
Top