Do all 775 heatsinks mount with the same bolts?

redman223

Gawd
Joined
Oct 28, 2006
Messages
1,013
Just wondering if I should cut a hole in the back of the motherboard tray, giving me access to those screws. But if they all mount with the same 4 screws then its no big deal.
 
I'm hoping that i am understanding your question correctly.

You should not have to ever modify the screws to the motherboard tray because your heatsink will never make contact with it. most heat sinks will mount to a backplate that attaches to the motherboard itself and not the tray.
 
Yeah, you misunderstood, sorry if I wasn't clear enough.

That plate that attaches to the motherboard, if you were to want to switch it out for another, you would have to remove the motherboard normally. This is why I was going to cut a square out of the back of the motherboard tray, just a small square that would give me access to the back of the motherboard, so that switching that plate would be easy without taking the whole computer apart.

However, if every 775 heatsink/waterblock mounts with the exact same screw setup (on the motherboard), then there is no point, as you would be able to easily switch back and forth using the same screws.

I used the same waterblock for almost 2 years so I don't know if the mountings are the same for other blocks/heatsinks.
 
Yeah, you misunderstood, sorry if I wasn't clear enough.

That plate that attaches to the motherboard, if you were to want to switch it out for another, you would have to remove the motherboard normally. This is why I was going to cut a square out of the back of the motherboard tray, just a small square that would give me access to the back of the motherboard, so that switching that plate would be easy without taking the whole computer apart.

However, if every 775 heatsink/waterblock mounts with the exact same screw setup (on the motherboard), then there is no point, as you would be able to easily switch back and forth using the same screws.

I used the same waterblock for almost 2 years so I don't know if the mountings are the same for other blocks/heatsinks.

No, not all backplates are the same. Putting a hole back there won't hurt anything though if you have the right tools to do it with.
 
Thanks, I'll go ahead and cut that hole soon then, since I gotta wait a few more days for my motherboard to arrive. This way I can go from air to water if I choose to in the future, without having to take the whole system apart again.
 
Thanks, I'll go ahead and cut that hole soon then, since I gotta wait a few more days for my motherboard to arrive. This way I can go from air to water if I choose to in the future, without having to take the whole system apart again.

I still think i'd be a pain in the ass to try to handle the mobo that way unless the tray actually slides out.
 
Back
Top