DIY cables for SF450

[Cherry Dude]

Hey there

So, I have decided to make my own PSU cables for my SF450. I have the Dan Cases A4-SFX (Both v1 and v2) and thought it would be cool to have cables that are not way to long. I have some experience with soldering and management wires, but will be new to crimping which will be cool, also for other projects. (I am thinking of getting this crimper)

As I am based in Europe, Shakmods seem like a good place to get the wire (18 awg), connectors and pins.

I have been looking for the SF450 pinout with no luck. Is it safe to assume it is the same as the SF600? Looking at Corsairs PSU cable compatibility list, as well as the FS series manual, it seems wattage is the only difference. Original has been so nice to make a pinout for the SF600, at it seem pretty idiot proof, which for some reason appeals to me…

Anyway this was a pretty long rant, so the short version again: Is Corsair SF450 pinout same as SF600?

 

[niclas90]

Yes, the pinout is identical. The cable kit that Corsair is selling for the SF series is compatible with both units, which would require them to be identical.

Also, i recommend checking out highflow.nl for all the supplies.

 

[Cherry Dude]

Yes, the pinout is identical. The cable kit that Corsair is selling for the SF series is compatible with both units, which would require them to be identical.

Also, i recommend checking out highflow.nl for all the supplies.

Thanks for the answer niclas90. Corsair have just replied also confirming they indeed are the same.

I'll check out highflow.nl, thanks for the tip!