Disabling northbridge fan = safe?

zaiLex

n00b
Joined
Feb 27, 2005
Messages
33
I have MSI K8N NEO4 motherboard, the northbridge fan noise annoys me, is it safe for me to just unplug it? I remember i could do that with my Abit AN7, also is safe to unplug the fan in OCZ PowerStream 520W? Will it explode or something? :p or just turn of the computer when it gets to hot? ALSO is it safe to unplug the fan on the x850xtpe built by ATi? I didnt know where to put this post because it concerns PSU Graphics Card AND Motherboards, i hope you won't be mad :p
 
for the graphics card and power supply, absolutely do not unplug the fan. that would be a very bad idea. for the chipset fan, i find that the answer is "it depends". if you chipset doesn't run too hot and if you have good airflow in your case then it might be ok. i know in my computer, i have the fan removed on my chipset because my cpu fan provides adequate airflow and my chipset fan failed
 
You can always get a heatsink for the thing, and make it purely passively cooled. That way it is cooled and it makes no noise. I believe zalman makes a popular cooler
 
i disabled my NB fan even with my overclock, since it was loud. No difference in anything whatsoever, i think it was there just for gimmick reasons.

my baord is an ABIT IS7-G
 
The nForce4 chipset runs very hot. Not recommended. There's a reason why those fans are so noisy.
 
If you want a better cooling option for your video card, just buy an ATI Silencer 4.

As for the chipset you can replace it with the a Zalman if it fits.

DO NOT REMOVE THE PSU'S FAN
 
I already thought about getting the zalman northbridge passive cooler, but it doesnt fit because the graphics card is in the way, but i have a zalman 7700-cu, does it cool the northbridge? I have it configured to silent mode (lowest setting).
 
what you can do is probably switch off the fan and run the zalman at a faster speed and see how that goes. If you notice any problems then you know what's wrong...

I would remove the fan alone totally to allow the heatsink to get as much air as possible.

Holla back with results
 
m-unit said:
You can always get a heatsink for the thing, and make it purely passively cooled. That way it is cooled and it makes no noise. I believe zalman makes a popular cooler

That's what I did. I got a CoolerMaster unit that's about the same size as the Zalman and it works just fine. No more annoying little fans that die all the time. Overall its nice.
 
I unplugged the fan but was to lazy to remove the fan though, so far no problems, i played cs for an hour, nothing unusual happened.
 
Ok i don't recommedn doing this, windows started to act funky so i checked inside the case and all around the fan are light burn marks or something, i do see what you mean by VERY hot. Do you guys think the zalman passive cooler will be enough to cool this toaster? I'm willing to risk it not being fitable because i can get it for mere 10 bucks.
 
I'll only recommend the Zalman NB47J if you've got a lot of airflow in the area of the nF4 chip.
 
the only cooler i have is zalman 7700-cu on lowest flow, besides the video card cooler and the northridge fan ofcourse. i unplugged my 14db silenx fans because i cant stand noise :D .
 
Back
Top