Did my ide channel die?

Livin4Real

Weaksauce
Joined
Oct 18, 2005
Messages
106
I've built many a computer but this is the first time I've had this happen. It seems as though my secondary ide channel has rolled over on me. Out of nowhere my two optical drives just started freezing and would have the constant led lit up. So I unhooked the cables and hooked one drive in with my hdd as a slave and it worked fine. So I'm guessing my second ide channel has gone bad somehow? Anyone have this happen to them? My only other thought was that my psu isn't pushing enough to power everything. I have two optical drives and my 160gb hdd and a 6600 agp card running off the psu along with 3 80mm fans. All on a 350w psu which I know is probably pushing it but would it cause just the second channel to not function properly? Weird
 
i'd be surprised if the channel itself was bad. My guess is PSU, like you said, or maybe the IDE cable you are using is bad. try switching cabes and seeing if that works? also check the jumpers on the drives, I had one problem that I couldn't fix for 2 weeks turned out that the jumper had wiggled loose somehow.
 
I swapped cables and checked all the jumpers. The only thing that I changed in over a year was adding the 6600 card and since it is powered, I'm leaning towards the psu. I have a new Ultra X on the way so we'll see if that fixes it. If not then I have a reason to upgrade :D
 
For the love of God, whoever told you to get an Ultra X?

-J.
 
It was cheap and it's a definite improvement over the one in there. This is for my backup rig not the one in my sig so I wasn't looking to spend a fortune on one.
 
Back
Top