Did my DFI Infinity Die?

The Rock

Limp Gawd
Joined
Mar 9, 2000
Messages
344
I've had this board for just over a week and I'm still trying to find the limits of my CPU and RAM. Anyways, I set the fsb to 200 and the memory to 166, since my PC2700 won't do 200. I reboot the pc and when it starts up it gave me 2 long beeps and that's it. I have tried clearing the CMOS, which didn't work. I even removed the battery with no luck. Hit "Esc" and the reset button at the same time didn't work either. Did the board just die on me? No post, not anything!
 
When you cleared the cmos, did you leave the jumper in the "clear" position for a few mins? It happened to my infinity and i had to leave it in the clear position for like 5 mins before it worked again.
 
Originally posted by Gakoe
Have you tried holding insert upon boot?

I don't think that works on most nf2 boards for some reason..






Try unplugging your PSU, then take out the cmos batter.. move the jumper to clear the cmos for atleast 10 seconds. move it back, pop the battery back in, and plug in the psu.. give it a whirl...
 
I've tried all those suggestions guys. Still nothing. I think it's dead. :mad:
I've already sent in my RMA request.
 
I also forgot to mention my keyboard lights keeps flashing, but still nothing happens.
 
Back
Top