• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

DFI nFII voltmods: stabilized voltages?

D

dobbz

Limp Gawd
Joined
Sep 4, 2002
Messages
339
this is also in Mainboards

http://www.malvescorner.com/nfii.htm

anyone done the Vcore and Vdimm mods and gotten their voltages stable at least? cuz for sure, my board is undervolted and flakey as hell. i just got an Antec TruePower 430 from the trading forum and Vcore/Vdimm are still way short and all over, and not even much less than with my Allied 300W pos.
 
i volt moded the VDD ad VCC on my abut nf7,,,wokrs great, went from 217fsb max to 246, 235 stabel...


for the power, i moded the PSU rails....so i can adjust them
 
well theyll raise the voltages, but if theres still gonna be such a huge spread (1.90v gives me 1.82-1.94), and if what i need is a minimum 1.90v Vcore for the OC i want, im gonna end up with one that might be at 1.90 minimum when it dips, but then be sitting at around 2.0v the rest of the time just producing excess heat. :(

DFI definately builds this board for overclocking. they even say so. so why are the voltages so fucked?

my Vcore at 1.90v is really 1.82 - 1.94
my Vdimm at 3.3v is really 3.20 - 3.24

should i RMA it? look at this

voltz.jpg
 
You must log in or register to reply here.
Back
Top