DFI Lanparty UT 250Gb not posting

bradbowl

Gawd
Joined
Dec 17, 2003
Messages
630
I just bought a DFI Lanparty UT 250Gb from a guy off the forums and it won't post. I've checked and re-checked all connections (HD LED, Power, ATX, etc.). I only have 1 HD, 1 CD rom, and a video card in it. I've cleared the CMOS. I see a red LED on when I turn the psu on but nothing happens when I push the power button on both my case and mobo.
I've tried two different procs and neither work.

Any ideas?

TIA!
 
You can try pulling the battery and clearing the cmos with the jumper for say 5mins and then see if that brings it back? Tried a different vid card? mem? etc etc good luck!
 
bradbowl said:
I just bought a DFI Lanparty UT 250Gb from a guy off the forums and it won't post. I've checked and re-checked all connections (HD LED, Power, ATX, etc.). I only have 1 HD, 1 CD rom, and a video card in it. I've cleared the CMOS. I see a red LED on when I turn the psu on but nothing happens when I push the power button on both my case and mobo.
I've tried two different procs and neither work.

Any ideas?

TIA!

sounds like what my friend is going through with his DFI "LANPARTY NFII ULTRA B" nForce2 Ultra 400 Chipset Motherboard cept the one red led is by the ram slots
have tried lots of different things but cant find the prob...i hope someone here can help you so i might be able to help him lol
 
Damn, somebody over at ClubOC forums is having the same problem. :mad: He's going to RMA the board, so unless some magic goes on, ya might want to do the same.
 
I've tried the cmos clear and still nada. Looks like RMA time :( I guess I'll have to be more careful when purchasing mobos off the forums.
 
Back
Top