DFI Lanparty NF3 Temperature problem

KoSMoKeNNy

Limp Gawd
Joined
Oct 9, 2004
Messages
225
Tried searching, but couldnt find anything bout it, so... Been helping my friend put together a nice little computer, but for some reason the bios reads the cpu temp at 81-82 C as soon as you turn it on. Its got a thermalright xp-90 on there with AS5, and it doesnt feel at all warm to the touch. Figured its a problem with the temperature probe on the mobo, but I could be wrong. Is it dangerous to try and run it like this, or should we just assume the mobo is wrong and drive on? Or is there something Im missing that would give it a reason to say a temp that high? Thx for the help.
 
First thing I would do is check to see if you have proper contact with you HSF and CPU, that sounds like the problem to me. Well, either that or TOO MUCH thermal compound could cause the same effect I believe.

Hope this helps :)
 
That board doesnt read temps right. My 3200+ is 50c from the moment i turn on my pc according to the bios, and i'm watercooling it. As long as you put the heatsink on right, you will be ok. Theres a beta bios that fixes it a little, but my board is still about 10c off.
 
Checked the seating of the heatsink already, that was good. And we were quite conservative with the AS5, so I doubt that would be the problem. Id also been aware of the board giving high readings, but I hadnt heard about anything near 80 C. Is there anything I can do to find out the actual temp if indeed the mobo is that far off? Cuz we plan on OCing the heck out of this thing, and the actual temp would be nice to know.
 
Back
Top