DFI Lanparty NF3 250GB help

iNViSiGOD

Gawd
Joined
Apr 16, 2002
Messages
596
I know i've posted alot of questions recently here and this is yet another situation. I've installed everything i need to for my new toy to work. The only problem is after a fresh install of windows it picks up on my ethernet as a 1394 Net Adapter. I've trieed uninstalling it and installing the chipset drivers several times, i always reboot when promptedd but it still uses the windows poor attempt at default drivers.

This is the 1st rtime i've run into this and am at a loss, i tried to manually update the drivers but it seems to be all enclusive in the shipset drivers package. Suggestions? Recommendations?

**EDIT** Yes i am logged in unnder the Administrator account.
 
iNViSiGOD said:
I know i've posted alot of questions recently here and this is yet another situation. I've installed everything i need to for my new toy to work. The only problem is after a fresh install of windows it picks up on my ethernet as a 1394 Net Adapter. I've trieed uninstalling it and installing the chipset drivers several times, i always reboot when promptedd but it still uses the windows poor attempt at default drivers.

This is the 1st rtime i've run into this and am at a loss, i tried to manually update the drivers but it seems to be all enclusive in the shipset drivers package. Suggestions? Recommendations?

**EDIT** Yes i am logged in unnder the Administrator account.

No idea, other then asking if you missed the obvious like shutting off the ethernet port in the BIOS. Are you sure you shut off the right one if you did? A lot of NForce 3 and 4 boards have two ethernet ports, one controlled by the chipset driver, one controlled by a 3rd party chip. Not familiar enough with your board to know if it has two ports or not, so forgive me if it does only have one. I'd ASSUME the default would be to have every port on, so I guess you could clear the CMOS, then go into the BIOS and set everything else the way you want it, remembering to look for the one for the LAN ports to see if it's set for Enabled or not.

Assuming you're using the NVidia ethernet port, it will show up as "NVIDIA NForce Networking Controller" or something similar under the "Network Adapters" icon of your Device Manager list. The 1394 Net Adapter/Firewire port will also show up under that icon.
 
Actually it is detecting the 1394 port and setting it up as a network adapter as well. For some odd reason they give you the ability to network using the firewire plug. If it is not recognizing your network card (check in device manager), it more than likely means that you disabled it in the bios. If it was a fresh install, the network card is more than likely sitting in device manager in an unknown/other category and you just need to update drivers from there and point it towards the driver you have for it. Should take care of your problem! ???


iNViSiGOD said:
I know i've posted alot of questions recently here and this is yet another situation. I've installed everything i need to for my new toy to work. The only problem is after a fresh install of windows it picks up on my ethernet as a 1394 Net Adapter. I've trieed uninstalling it and installing the chipset drivers several times, i always reboot when promptedd but it still uses the windows poor attempt at default drivers.

This is the 1st rtime i've run into this and am at a loss, i tried to manually update the drivers but it seems to be all enclusive in the shipset drivers package. Suggestions? Recommendations?

**EDIT** Yes i am logged in unnder the Administrator account.
 
Yeah it is typical that windows recognizes the firewire ports as a network drive(atleast I have noticed that among NForce chipset/via chipsets)....Firewire can be used as a network adapter to other computers, it actually pretty cool....
 
WOW! No kidding? I've never heard of a firewire port being detected as an ethernet device.
 
Ok, im starting to get aggitated. Might have to RMA the board if this keeps up. I just cant get it at stock speeds to stay stable, i went to install SP2 and it locked. Now after rebooting and getting the windows splash screen it just blanks out.

Im going to try and find a way to get the HSF off and RMA it (that one tiny drop of arctic silver 5 WONT LET GO OF THE FUGGIN CPU!!) if i cant get this figure dout soon.
 
iNViSiGOD said:
Ok, im starting to get aggitated. Might have to RMA the board if this keeps up. I just cant get it at stock speeds to stay stable, i went to install SP2 and it locked. Now after rebooting and getting the windows splash screen it just blanks out.

Im going to try and find a way to get the HSF off and RMA it (that one tiny drop of arctic silver 5 WONT LET GO OF THE FUGGIN CPU!!) if i cant get this figure dout soon.


This was a long time ago, and I don't know if this was a common problem or just one guy having this, but I THINK I remember a thread where some guy disabled thermal throttling for the CPU in the BIOS and had a lot of problems even POSTing. Don't know what CPU he had, or if they have updated the BIOS what BIOS edition or much else, but well...if you've shut it off maybe turn it back on and see what happens?
 
Thanks, ill give that a try tonight.

UPDATE: Tried removing the Geforce6 6800 from the machine and that seemed to stop the random blackouts, currently substituting with a little Radeon8500 AIW and its ok. Makes me think the PSU isnt cranking out enuff for both the board and VID card, but its a nice Antec 400w so i wouldnt think that would have gone bad already..........could it?
 
Check out this link, 3rd pic from the bottom:
http://www.angrygames.com/NF3_2.htm


Make sure of the following in your bios.
Set MAC LAN (nvidia) to "AUTO"
Set MAC Media interface to "RMCII"

By the way, Firewire speeds are 400 MBit/s compared to standard network speeds of 10MBit/s & 100MBit/s. Using firewire to transfer large files to other PC's is great if you don't have a Gigabit network.
 
OK! Did what was recommended and also made sure to install the latest forceware drivers. That seemed to fix about 90% of the problems. Last and final step is to figure out why my Geforce 6800 displays garbage upon boot and ill be ready to start rockin!
 
iNViSiGOD said:
WOW! No kidding? I've never heard of a firewire port being detected as an ethernet device.

Yeah, I even remember Soundblaster advertising that you can game using it's firewire port as a network to other computers with firewire with it's audigy line of cards.....
 
what drives / other hardware are you running??

if your running alot of drives AND the 6800 then the psu MIGHT not be enough......
 
4b5eN+EE said:
what drives / other hardware are you running??

if your running alot of drives AND the 6800 then the psu MIGHT not be enough......

Drives: Maxtor 7200rpm 8mb 80gig, WD Caviar 7200rpm 8mb 100gig, Old 10x DVD Reader, Old 8x CDRW.

I've tried removing all but the boot drive and it still does it. It seems to be intermitent too. I thought PSU but the PSU turned out to be ok.
 
what EXACTLY is it doing and WHEN you havent even said what it does. it just does "stuff" is all i see.

my dfi hard some SERIOUS issues until i did these things

1)
stopped using the piece of shit nvidia SATA ports! period they are crap dont use them.
if you do use them be sure you use ports 3 and 4 the ones closest to the cpu. 1 and 2 are not locked meaning if you do any overclocking they become unstable.

2)
make sure your AGP in the bios is set to 256meg if its a 256 meg card or 128 if its a 128 meg card.

3)
turn cu throttling to the LOWEST setting NOT off, off will cause the system to NOT boot up. this is a known issue for these boards and the only fix is a hacked bios.

4)
UPDATE THE BIOS IS YOU HAVE NOT!! and even if you have,, flash the thing again, these boards are infamous for having bad bios flashes.

5)
make damn sure your cpu voltages and ram voltages are not to high or too low. do NOT leave them at auto, this is no good research your hardware and find out what the best voltage settings are if your not overclocking.

6)
if you have a gig of ram you MUST set the bios dram setting to 200mhz, otherwise doublesided ram defualts to 333mhz.

7)
god what else,, hhmm ive had nothing but issues with this board but it runs great after about 2 weeks as long as i dont use the nvidia sata ports, it dont matter what i use i have issues.

i dont see where you have posted what your psu is,,, how about you tell us so we can tell you if its a piece of shit or not. with this hardware and that video card if you have anything less than 350-400 watts and 20+amps on your 12v+ rail forget it its a poopy psu. and even then it could still be bad.

NO OVERCLOCKING!! none! set the cpu and ram to the proper settings, and when you get into windows install everything then the video card drivers.
go into the video card control panel and look at the cards temps and then tell us what the temps are on the card.
 
Actually i have it running perfectly stable now w/ the exception of the vid card getting snarky once in a while. And i believe earlier on i did state that it was a 400w Antec PSU, i could be wrong tho.

I dont use the SATA ports so im not worried about that.
 
Back
Top