DFI Lanparty Mods

Mr. Bill

Limp Gawd
Joined
Mar 13, 2003
Messages
274
I plan on getting this motherboard to replace my dead Chaintech Zenith. Out of the box, I want to replace the 2 coolers on the northbridge and southbridge with active coolers.

http://www.lostcircuits.com/motherboard/dfi_nfii_ultrab/6.shtml

I pretty much want to do that. But, I dont have a chrome orb, nor do I want to mess with mounting it, so I figured I would get a chipset fan that fits with the existing holes. I have yet to choose one, and would like a recommendation on somthing that would fit the chipset heatsink mounting holes. I also have a geforce2 GTS (herclues) and want a new fan for that (I'm going to keep that think till its dead). Ive already got some big ram heatsinks from a hercules gf3 ti 500. And the final issue, the southbridge. I dont think it has mounting holes, what do i use to mount it? Some sort of glue? Thanks...

I also want to put some little thing on the clock generator and obviously, overclocking is a priority...
 
Alright, so what about the southbridge, do i simply use the "Arctic Alumina thermal adhesive" to put another cooler in there? I think I'll get the second kit, with all the heatsinks included.

Edit: Also, how do i remove the old southbridge heatsink, is it just a nice pry, or what??
 
Originally posted by Mr. Bill
Alright, so what about the southbridge, do i simply use the "Arctic Alumina thermal adhesive" to put another cooler in there? I think I'll get the second kit, with all the heatsinks included.

Edit: Also, how do i remove the old southbridge heatsink, is it just a nice pry, or what??

afiak the second one is the nicer of the two...


the boards i have had did not come with any cooling on the southbridge.. however, i would assume that it isnt on there with much of anything except thermal tape or pad. i would try slowly twisting it or using a screwdriver with a credit card or something of that nature underneath it and simply pry it off.
 
the boards i have had did not come with any cooling on the southbridge

This one comes with a passive one, but I'd like to know it isnt the reason for instability. And at a LAN, i may have the second crappiest video card of my group of friends, but my computer will be [H]ardcore... My goal is 2.7, its been that since my old computer. I killed it in a lovely Peltier incident:( I plan on getting a Barton 3200+ 400. And a new Thermalright heatsink with the heatpipes and the mounts that bolt onto the motherboard.
 
the sp-97 is sweet.. good choice.. i would go with a 92mm tornado and a fan controller.

the southbridge on my NF7-S v1.2 got pretty hot to the touch. i would recommend putting a small active solution on it. possibly the one from the NB or getting one of those huge passive zalman hs's.

something like this perhaps? ... http://2cooltek.safeshopper.com/67/277.htm?398

id love to be able to hit 2.7 but my ram and processor suck major balls. :eek:

edit.. lol, i have that video card laying on the floor behind me.. you really need to get rid of it... you wont notice any change in gaming performance if you dont.
 
im not quite the gaming enthusiast i was, if the game runs 1024x768, and its pretty without framerape, im good. Once HL2 comes out, Ill be happy to get another one
 
I have a small passive heatsink pasted to my southbridge using only Ceramique. It's sticky enough to hold there once it cures. Just don't touch it.

ramsink.jpg
 
uh, the sp97 doesn't fit too well on the lanparty without some mods.. you'll have to cut the x plate alittle and trim the washers.. thermalright is supposed to have replacement parts for the dfi boards... if you go over to amdmb.com's forums, under the dfi section, there's all the info you'll need to mount it..
 
Originally posted by Barnaby
uh, the sp97 doesn't fit too well on the lanparty without some mods.. you'll have to cut the x plate alittle and trim the washers.. thermalright is supposed to have replacement parts for the dfi boards... if you go over to amdmb.com's forums, under the dfi section, there's all the info you'll need to mount it..

furthermore.. if you have any questions about DFI boards. that is the best place to go.
 
Originally posted by Jason711
furthermore.. if you have any questions about DFI boards. that is the best place to go.

yup... although angry_games does work for dfi, even he frequents over there more often, and do does a few other guys..
 
uh, the sp97 doesn't fit too well on the lanparty without some mods

Well that sucks. Now then, I need the BEST air cooler known to man. Anything using built-in peltier? I dont want anything more than like a 100 bucks...
 
replied to your thread at amdmb =)

sp-97 is the best to get. The replacement backplate + mounting hardware is only $5.00 from Thermalright. Make sure you state you want USPS shipping or else they'll charge an arm and a leg using UPS =(

also just try the NB and SB right out of the box...i've hit 250x9 on the board with the stock NB cooler and I've never actually had to pull the NB from any of them. They aren'y the best on earth by any means, but before you spend the money on it (that would be better used to buy BH-5 RAM heh)), see what it can do =)
 
Buy BH-5 ram

I have 2x512 mb Corsair XMS sticks of ram. Bought at different times. Is there a way to find out if I can, or do have the BH-5 ram? Id rather try not to take the heatspreaders off. Would the serial numbers on the stick tell me?
 
Originally posted by Angry_Games
replied to your thread at amdmb =)

sp-97 is the best to get. The replacement backplate + mounting hardware is only $5.00 from Thermalright. Make sure you state you want USPS shipping or else they'll charge an arm and a leg using UPS =(

also just try the NB and SB right out of the box...i've hit 250x9 on the board with the stock NB cooler and I've never actually had to pull the NB from any of them. They aren'y the best on earth by any means, but before you spend the money on it (that would be better used to buy BH-5 RAM heh)), see what it can do =)

does that also take care the washer problems hitting the caps? most of the mods include trimming the washers too...
 
Back
Top