• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

DFI BLOODIRON

B

bennyben1979

n00b
Joined
Oct 18, 2008
Messages
12
hi guys i am trying to get my ram to run at 1200mhz they are the pc2-9200 1150mhz reapers, i know they are good for over 1200mhz i have upped the voltage to 2.3v but its still not stable, i have tried upping the NB volts but no good either ?

thanks in advance
 
Have you adjusted the timings? Aside from RAM and NB voltage, those are really the only settings that would affect the RAM's stability.
 
i am using 5.5.5.15.32 at the moment would increasing the timing to say 5.5.6.18.32 make them slower ?
 
Yes, it would make the RAM slightly slower, but it might help you hit 1200MHz. I wouldn't say it's worth it though. The small boost in RAM frequency won't make a difference to the overall performance of your system.
 
managed the 1200mhz but still a little unstable so backed off to 1000mhz @ 4.4.4.10 and just as fast and stable :::)))
 
Try increasing the trc value from 32 to 45 and see if that helps.
 
You must log in or register to reply here.
Back
Top