![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
The_Great_YODA
n00b
- Joined
- Sep 13, 2005
- Messages
- 3
I have a single md3000 enclosure connected to a powervault NX1950 that I cant seem to get running correctly. Using the modular disk storage manager i can create virtual disk using whatever raid (0, 1, 5, 10) and assign them drive letters. Tthe problem is they do not seem to be performing how they should.
The specs on the md3000 are 2 raid controllers, currently 10 15k 300gb sas drives, connected to a pv nx1950 running Unified data storage server 2003.
Using HDtach i am only getting around 190MB bursts and average reads of 140MB. I get those speeds under raid 0, 5, and 10. Do i need a completely different program to accurately test this unit or is something off.
I'm new to these type of units, so I'm not sure if i am even correctly configuring it. Any help would be great.
The specs on the md3000 are 2 raid controllers, currently 10 15k 300gb sas drives, connected to a pv nx1950 running Unified data storage server 2003.
Using HDtach i am only getting around 190MB bursts and average reads of 140MB. I get those speeds under raid 0, 5, and 10. Do i need a completely different program to accurately test this unit or is something off.
I'm new to these type of units, so I'm not sure if i am even correctly configuring it. Any help would be great.