Dead X58 board ? :(

Dynafrom

Gawd
Joined
May 28, 2006
Messages
628
Just got a new gigabyte EX58-UD3P and when I installed it I get no video from my video cards ( tried 3 cards), and there is no power from the USB ports but the fans, mobo lights, and harddrives spin up. I tried isolating the board (booting off cardboard box) and still doesn't work. Memory problem? PSU problem? or MOBO problem?
 
what do you mean set to first slot? I've tried setting a video card on each slot. No video :\
 
Have you tried a different PSU or tried the PSU in a different system to confirm whether or not it works properly?
 
Yes, I used 2 different PSU's

EDIT: NVM figured out it is 100% the mobo.
 
Last edited:
move the ram to the blue slots to the white ones , should work then

had that problem on my x58-ud4p
 
move the ram to the blue slots to the white ones , should work then

had that problem on my x58-ud4p


This.

Thought it was a dead board, turned out to be the weird ass ram config. Seriously who came up with putting it in the white slots? :confused:


On the sidenote is 57c on the northbridge too hot? I just got my thermalright ultra and did some hefty OCing. On load it goes up to 67-71c (but not any hotter).
 
Back
Top