Dead PC, need help with new PC asap please!

Psychotext

Supreme [H]ardness
Joined
Mar 21, 2005
Messages
5,897
Long story short... my current PC has fried it's motherboard and CPU and I need to put together a new machine pretty quickly! :eek:

Just need a little help... can get a Q6600 or an E6850 for the same price and I'm wondering what would be best for me. I do game on the PC but I also do a ton of media encoding. Would consider overclocking the processor to get the best out of it but the last ones I did that on were old celerons and Durons so I'm a bit out of touch. :D

Don't have a PCI graphics card and I want to get something that will outperform my old AGP X1950 pro. Perhaps an 8800 GTS?

Would like to get an SLI capable motherboard (so I can throw in another card when I need a quick upgrade) but I haven't heard any recommendations for a solid reliable socket 775 SLI motherboard. Do such things exist?

Thanks to anyone that answers. I would normally be all over the research myself but I need to get this gear ordered ASAP! ;)
 
Get the Q6600, it will help with your media encoding. Get it from ClubIT.com because they guarantee G0 stepping. G0 stepping is good because it runs cooler, therefore it overclocks better.

Yes, an 8800GTS will outperform an X1950Pro. Another option is the HD 2900 Pro, which can be OC'd to XT speeds. What size monitor do you have and what games do you play?

SLI as an upgrade path isn't worth it. Its better to sell the old card and pickup a new gen card instead. SLI is only needed for high resolution 3D rendering. So, if you have or plan on getting a 1920x1080 LCD or higher, and want to game on it at native resolution, then keep SLI as an option. Otherwise, theres no need for it. A single GTX is still fine for a 1920x1080 (or 1920x1200) LCD screen, and more cost effective than an 8800GTS SLI setup. SLI as an upgrade path isn't worth it unless, again, a large LCD is in the future plans. There should always be a better single card solution, and you could sell your old card to help offset the cost.

If you want SLI, get one of these boards:
$225 - eVGA 122-CK-NF68-A1 LGA 775 NVIDIA nForce 680i SLI ($20 MIR)
$170 - eVGA 122-CK-NF67-T1 LGA 775 NVIDIA nForce 680i LT SLI

If you don't need SLI, check out these boards...
$91 - abit IP35-E LGA 775 Intel P35 ($20 MIR)
$100 - Gigabyte GA-P35-DS3L LGA 775 Intel P35
$130 - Gigabyte GA-P35-DS3R LGA 775 Intel P35
$145 - abit IP35 LGA 775 Intel P35
$135 - Asus P5K LGA 775 Intel P35 Express
$155 - Asus P5K-E/WIFI-AP LGA 775 Intel P35
$170 - Gigabyte GA-P35-DS4 Rev. 2.0 LGA 775 Intel P35
$180 - Abit IP35 Pro LGA 775 Intel P35 ($20 MIR)

FYI, you'll need a good cooler to OC that quadcore...
$45 - Tuniq Tower 120 CPU HSF
$46 - Thermalright Ultima 90 CPU HS + FBA09A12M - Z ($3)
$55 - Thermalright Ultra 120 eXtreme CPU HS + Scythe S-Flex Fan SFF21E ($15)
 
Thanks for all the info. Was just looking at coolers and sadly I wont be able to fit the tower heatsinks into my case so it's probably going to be something like the XP-90 for me.

Regarding gaming... ideally I'd like to be able to handle 1920x1080 so perhaps a GTX would be a better purchase. I was thinking SLI mostly because I didn't want to spend the earth right now because this wasn't a planned purchase. That said, I've just looked up some reviews on the 8800 in SLI and the performance increases weren't what I was expecting them to be. Plus I think I'll mostly be playing TF2 on the PC and last I checked, the source engine doesn't really like SLI too much.

I did consider the HD2900 but I'd heard reports about the volume of the things and one thing I'm trying to do with this new system is make it as quiet as possible so that I get more benefit than just increased speed! Never really been that worried about noise but having just spent a fair bit of time silencing my media server I'd noticed just how loud my desktop PC was... especially when the X1950 fan kicked in.
 
What case do you have? The Ultima90 is great, and its slightly taller than an 8800's PCB.
 
Coolermaster middle tower (I forget the model). There's about 15cm clearance from the motherboard to the side of the case.

[Edit... Oh, yes that should fit nicely. Thanks.]
 
I had a tuniq in my Centurion 532, fit fine.

Anyhow, yah, I just ran the Ultima90 on my E6750 @ 3.2Ghz without a fan, and it hits 65°C full load with Orthos! With a fan, it stays around 40°C during Orthos, at 3.2Ghz. With my Tuniq, it was around 42°C at that same speed.
 
One last question... much point in getting anything faster than DDR2 - PC2-6400? Been looking at 2gb with either 4-4-4-12 / 4-3-3-15 timings.

No, there's no point in getting anything faster than DDR2-800, especially with a Q6600.

Formulas for Intel platform @ 1:1 settings: (base FSB speed is SDR, or single data rate)
(CPU Multiplier) x [Base FSB speed] = CPU Clock speed
2 x [Base FSB speed] = RAM speed (DDR: double data rate)
4 x [Base FSB speed] = Effective FSB speed (QDR: quad data rate)

On Intel platforms, running the RAM higher than a 1:1 ratio with the CPU is, for the most part, useless. All you need is a 1:1 config. Here's some possible clock speeds (as always with OC'ing, YMMV):

Q6600: 9 × 266 = 2.4Ghz, DDR2-533 << STOCK speeds
Q6600: 9 × 333 = 3.0Ghz, DDR2-667 << Nice OC
Q6600: 9 × 378 = 3.4Ghz, DDR2-756 << Good OC, near max for B3 stepping
Q6600: 9 × 400 = 3.6Ghz, DDR2-800 << Great OC, near max for G0 stepping

Most DDR2-800 RAM can OC a bit anyhow, even if you want to go past 3.6Ghz if you're lucky enough to be able to.

Both of those kits are CL4, which is what matters most. You won't notice any difference between those two kits unless you were running benchmarks (even then, the difference is minimal), so don't pay a huge price premium for one over the other. Same goes for CL4 and CL5 sticks. You won't notice the performance difference, so don't pay a huge price premium for lower latency. The speed of DDR2 more then compensates for the high latencies.
 
Back
Top