• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Dead CPU, Mobo or other?

pigwalk

[H]F Junkie
Joined
Dec 14, 2004
Messages
8,396
Hey guys, noticed last night that my Saitek was lighting up even though my machine wasn't on, so I turned power off from the PSU and it went off, didn't think much of it.

This morning I try turning my machine back on and NOTHING. My Eclipse still lights up but thats it. Tried a differnt psu and still nothing. Took the machine apart, unplug any non necessary peripherals and still nothing. Short the PS_ON to ground on both PSU's and both run fine. The board is an Epox 9NDAJ NF3, with a Winchester A64 3200 CBBID. The chip shows no physical signs of burning or anything extraneous. Same with the mobo. I tried using the power switch from a different case I had lying around and still nothing. I{m guessing it's either the CPU or Mobo, most likely the CPU. The troubleshooting display on the mobo gives me nothing, but it still passes power through the USB ports even though the PSU isn't running. What gives?

Help ASap please!!

-wil
 
it doesn't start at all? no fans spinning.. anything? try it out of the case with ram and vid card only - start it by shorting power switch pins with screwdriver..
 
TheMostWantedPolishTwin said:
it doesn't start at all? no fans spinning.. anything? try it out of the case with ram and vid card only - start it by shorting power switch pins with screwdriver..

Tried with both different PSU´s and still nothing. All I get is power to the USB ports, and that´s without either PSU even being turned on. Anyone else? Also, 4 pin connector is plugged in everytime, still nothing.

Please help a guy out, I just got to South America for a few months of vacation, so I can´t RMA anything, and replacement parts are going to cost me an arm and a leg here!

-wil
 
Back
Top