Dead Board?

Joined
Feb 9, 2005
Messages
7
Recently my computer was having a problem where it would reboot before it could do anything such as load windows or linux. It would make an aweful noise and reboot. I removed the RAM, all the hard drives and other devices leaving only the processor and the Video card. I figured the processor was dying but then realized that probably wasnt the cause. Now the computer wont boot at all, it turns on for a split second and then goes off so i took out the PSU and 3 of the pins on the ATX connection are burned. Swapped out PSU and put in a new one, that one also turns on for a second then off. I have a feeling the burn marks on the ATX connection -> damage on the ATX connection on the mobo. Anyone have any input on this situation?

Billy
 
you probably fried part or all of your board. also, you will not boot into bios without ram.

very truly yours,
politenessman
 
I know that it wont boot to bios without the RAM but i was checking to see if the noise that my computer was making still existed when i removed ALL the componants that i could possibly remove.
 
Back
Top