DDR2 Voltage question

Joined
Dec 18, 2006
Messages
8
OK- I read both FAQs (which are sorely outdated) and even did a search and only turned up one thread about voltage which didn't apply to my question.

I am looking to buy new memory for a system build, but I noticed that there are several different voltage levels. Here are the modules I am looking at:


GeIL Ultra 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)

Cas Latency: 4
Heat Spreader: Yes
Timing: 4-4-4-12
Voltage: 1.9V-2.1V
Model: GX22GB6400UDC


Kingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)

Cas Latency: 4
Features: Tested for optimum performance on ASUS P5WDG2-WS and ASUS P5WD2-Premium
Heat Spreader: Yes
Timing: 4-4-4-12
Voltage: 1.95V
Model: KHX6400D2LLK2/2G

Kingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)

Cas Latency: 4
Features: NVIDIA SLI-Ready
Heat Spreader: Yes
Timing: 4-4-4-12
Voltage: 2.0V
Model: KHX6400D2LLK2/2GN

CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)

Cas Latency: 4
Features: EPP (Enhanced Performance Profiles) and also SLI certified
Heat Spreader: Yes
Timing: 4-4-4-12
Voltage: 2.1V
Model: TWIN2X2048-6400C4

----

Now, I have used all three brands before and for several years now, so I am not asking about brand choice. After reviewing the specs, you can see that the only difference (other than the SLI/EPP feature) is the voltage. Does anyone see any benefit in getting the Corsair or Kingston solely for the voltage difference? Any other notes or recommendations?
 
DDR2 Spec is 1.8v, but manufacturers are having to boost voltages to get stable speeds at certain speeds and timings (e.g. To get DDR2-800 with 4-4-4-12 they have to bump up to 1.9 or 2.1 or something.). The higher the default voltage the less likely you'll be able to get a higher overclock than a set with same specs but a lower default voltage. Other than that it doesn't matter as longs as your motherboard can recognize the non-spec voltages.
 
Thank for the reply, your information makes sense. May I ask where you saw the listed spec for DDR2?
 
Back
Top