• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

DD MC-TDX Intel 775

no it doesnt... the mounting system is terrible for those blocks (even though the block performs good i will say that)

if you get one the best thing to do is glue the bottom nut to the bolt that goes underneath the motherboard otherwise you'll be tightening it one day and it will fall off behind the motherboard.
 
nightwalker said:
no it doesnt... the mounting system is terrible for those blocks (even though the block performs good i will say that)

if you get one the best thing to do is glue the bottom nut to the bolt that goes underneath the motherboard otherwise you'll be tightening it one day and it will fall off behind the motherboard.
Click to expand...

LOL . . .I always do that. Also, use a brass knurled head screw right on top of the washer next to them mobo on the top part instead of a regular screw. That way you can tighten it easily (they come loose as well).

]

I have several backplates from Danger Den . . .you can get one custom if you call and ask for Debbi.
 
DarthBeavis said:
LOL . . .I always do that. Also, use a brass knurled head screw right on top of the washer next to them mobo on the top part instead of a regular screw. That way you can tighten it easily (they come loose as well). .
Click to expand...

haha i knew i couldnt be the only one... nice idea adding the brass head screw on the top side of the board too i will remember that for the next DD build :D
 
DarthBeavis said:
LOL . . .I always do that. Also, use a brass knurled head screw right on top of the washer next to them mobo on the top part instead of a regular screw. That way you can tighten it easily (they come loose as well).

I have several backplates from Danger Den . . .you can get one custom if you call and ask for Debbi.
Click to expand...

do you think i would need one??
 
Eibach said:
do you think i would need one??
Click to expand...

if you're one of those people who likes to tighten things down really hard to the board then i suggest getting one to avoid bowing the board, if you just tighten it till its tight and not like stressing tight then you wont need one.
 
well i have left debbi a message hopefully i will get a call back today i think i may just go ahead and get it only because i have 18 reward points with them and i think i should just use them =) i will let you know what happens thanks for all the help
 
You must log in or register to reply here.
Back
Top