Cut-rate server MB...

Atragon

Limp Gawd
Joined
Jan 31, 2004
Messages
338
Well, this is somewhat contradictory, since in a server MB, you want high quality and reliability...but in a cut-rate system you tend to get neither.

Basically what I'm trying to do is to put together a fairly low-end system to act as either a webserver, a pvr, or a game server (Not sure what yet).

probably a webserver or a game server, since I'll be retiring my main rig soon and can turn it into a PVR.

So I'm looking at somewhere in the region of Duron 1.6 with around 512MB of RAM. For the motherboard, I'm looking for something in the region of $75 Canadian, so my options are somewhat limited, I'm especially interested in the MSI K7N420 Pro

other possiblities are an ASUS A7N266-VM , or, either the ECS K7S7AG, or the L7VMM2.

Any thoughts about the MSI and ASUS boards? Or should I really be looking at a NF2 board even though it'd be a lot more expensive?
 
Of all the places to cut corners on a system the motherboard is not a good one to start with.

I would look at Asus and MSI perhaps. ECS anything is right out. Nothing but junk.
 
I wouldn't say 'cut corners' since these boards were some of the better boards when they came out initially... ;)

But I don't see what real gain I'd get from using a nforce 2 or a kt600 based motherboard for a duron 1.6 processor, if there is a signifigant gain then by all means it would be useful, but otherwise, what's the points?
 
If those are your choices, I would pick the Asus board. Been burned by too many RMA's w/ MSI. Also, why a duron and not an A-XP?

I just took my old rig and turned it into a SBS 2000 machine. Runs great w/ an AXP 1800+ and an Abit OTES 4200!
 
On the server side, the board will not make much of a difference for the stuff you're looking at- just get a reliable one- the Asus or MSI should do just fine.

I'm running a dualie PIII 866 that's a web server, sql server, game server, file server, ftp server and runs one instance of folding @ home, and the thing is never pegged (folding does about 50%, everything else is less than 10%).

The Duron is a great chip- at 1.6Ghz, it'll out perform the 1800+ in strictly number crunching exersizes while costing $15 US less, i'd call it a deal.

If you want a cheap NF2 board that is very reliable, I reccomend Shuttle's AN35N Ultra- I've got one of the buggers and i'm quite pleased with it. If you need video onboard, consider Shuttle's MK40VN, Asus's A7V8X-MX, MSI's KM2M-L or KM4M-L- a good NF2 board w/ GFX is Shuttle's MN31N- the other onboard video ones I mentioned are VIA based.

Avoid ECS and KT600 chipset like the plague.
 
"Avoid ECS and KT600 chipset like the plague."

Man you've got that right.
 
Back
Top