• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Crystalfontz lcd users please come in

J

jetjaguar

2[H]4U
Joined
Jan 28, 2001
Messages
2,538
i recently received my crystalfontz lcd 20x4 in a single 5.25 bay ..
comes with an internal usb cable .. the problem is that the part that
connects to the motherboard has 4 wires with 4 connectors .. where
the usb connectors on my motherboard arelike 8 pins or something like
that .. im using a dfi expert .. anyone ?
 
Take a look at this

usb layout

look at example C this is the pin assignment of the usb connection on your board.

C1_small.GIF


You can either use the left or the right column. S-Gnd will not be used. Just look on the cable that came with your lcd where to place each connector.
 
hmm u quoted example C .. but u said D .. so which one is the right one ? example D
 
It's c indeed. Just take a closer look at your USB connection on your motherboard. You can even see the pins in the manual of your DFI motherboard, just count the pins. I had the same question a year ago when I wanted to connect a device with a four pin USB connection, so I can imagine why you asked this question.
 
hmm in the pic u posted it shows missing 1 pin on the bottom right .. but on mine i think its top left or something .. i gotta check it out
 
Thats just because of the orientation of the board. He can't tell which way your board is pointing.

The diagram is correct however.
 
You must log in or register to reply here.
Back
Top