• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

CrystalFontz 634 LCD

S

sdk

[H]ard|Gawd
Joined
Dec 2, 2003
Messages
1,597
Its a 4x20 LCD.

I was gonna put it in my Lian Li PC65B in the 3 x 3.25 bays.

will it fit?
 
I believe wayne ment that you could simply measure your bay size with a ruler, and compare that to the size of the LCD, which you could easily find on the net. Just a guess though....
 
with quite a bit of modding it will work, but going straight into the 3 1/2 bay with just a simple bracket is a no. The PCB for those screens is a little over 5 inches.
 
oh yeaha

i'd take my 3 3.25 bays, glue it togther, put wodden mounting brackets in the corners, then cut it out throw the lcd in, but the cd is gonna be with at the edges
 
being a CF owner and seeing many different models of the CF displays(its the display preference of the LAN i go to) the 634 takes up 2 of the "CD-ROM" bays the 631 takes up a floppy bay and has control buttons (but the software/hardware is still in beta) the 632 i belive takes up a floppy bay with out buttons, and the 633 is the size if a 631 but takes up a 5.25 cd-rom bay but the control buttons do work
 
You must log in or register to reply here.
Back
Top