Crossfire pictures and info

Ether

Limp Gawd
Joined
Jun 24, 2004
Messages
187
Seems that the Inq has some more info and pics of ATi's Crossfire.

Picture of the card (notice the first DVI adapter and its high pin count).

Picture of the set up (two cards, dongle connected).

Some paraphrased ATi jibber-jabber about the performance (typical INQ quality....can't quite tell what it means).

Only a 10% gain in 3DMark03 over a single card? Weird

100% gain in Splinter Cell over a single card?

Should be interesting the next few days as we get more official info from more reliable places.
 
Why does everyone care about 3dMark? Just wondering. Benchmarking is such a waste of time and effort.
 
i hate the fact that I have to use an ATi Chipset tho....

We all know that Intels chipsets are the most superior for their CPUs and Nvidia's NForce chipsets are the most superior for AMDs cpus...

Sigh...
 
Brent_Justice said:
you have to use the nForce4 if you want NV SLI....

Yeah but Nforce4 is also currently the best chipset for AMD64 which was his point. This may change depending on the quality of ATi's chipset efforts though.
 
Brent_Justice said:
that's an opinion

you're missing my point ;)

Nah I got your point. What I was getting at was that having to go with an Nforce4 chipset for SLI will not be a sacrifice in the eyes of most enthusiasts. And yes it is an opinion, but a widely held one in this community ;)
 
A number of reviews have shown. the ATI Xpress200 chipset actually OCs alot

Anandtech I believe did a review
 
so now how long must i wait for a new graphics card? :confused:

and i was all set on buying my 6800GT... :(

 
Hate_Bot said:
A number of reviews have shown. the ATI Xpress200 chipset actually OCs alot

Anandtech I believe did a review

Yeah, hopefully once they're widely available and we get some user feedback the quality holds up. It's about time we had some serious competition in the chipset arena. It seems that most people have given up on Via.
 
So you can mix and match cards? An x800XL master with an X800XT slave? That could be interesting.
 
trinibwoy said:
It seems that most people have given up on Via.

Via can only blame themselves on that one. I've had 3 boards with Via chipsets and only one was halfway decent (Abit VP6). The others I sold off to get a better board.

Too bad ATI won't make their tech. able to run on ANY PCI-E chipset...they'd capture an existing PCI-E customer base without them (the customer) having to invest in a new mb.
 
Well, looks like it's about time for things to heat up once again...can't wait...

I must say, their benchmark numbers sound a bit wierd...seems like a pretty random selection of games...and an even more random selection of results...

It "works with all games"...and yet the % increase is all over the map?

I get the impression ATi's Crossfire is going to be just as buggy as SLi...

Being able to do different cards is cool...but the external dongle? that's just plain wierd...
 
USMC2Hard4U said:
True, But like it was said. NVidias Chipsets are the best option for AMD CPUs...

Well, in all fairness, the ATi chipsets are no slouch...but they have a ways to go to win over some mindshare from the nforce series...
 
USMC2Hard4U said:
True, But like it was said. NVidias Chipsets are the best option for AMD CPUs...


There is absolutly nothing wrong with the Xpress 200 chipsets. Maybe nVidias domination of chipsets has something to do with VIA releasing crap? Theres no decent alternative. Not to mention they had a monopoly on the market for 4 months. People dont like to wait. Including me.
 
FanATIc said:
There is absolutly nothing wrong with the Xpress 200 chipsets. Maybe nVidias domination of chipsets has something to do with VIA releasing crap? Theres no decent alternative. Not to mention they had a monopoly on the market for 4 months. People dont like to wait.

Right, like I said, it's all about mindshare.

The ATi chipsets are nice...all the reviews I've seen have been very positive. The nforce4 boards have a couple more features but no deal-breakers...

However, let's see a show of hands who wants to build a system on a widely unknown motherboard? Not me.
 
^eMpTy^ said:
Right, like I said, it's all about mindshare.

The ATi chipsets are nice...all the reviews I've seen have been very positive. The nforce4 boards have a couple more features but no deal-breakers...

However, let's see a show of hands who wants to build a system on a widely unknown motherboard? Not me.

Considering every single Tier 1 motherboard manufacturing company picked it up? Me...i think i'll trust them.
 
^eMpTy^ said:
Being able to do different cards is cool...but the external dongle? that's just plain wierd...

Voodoo cards used an external pass through cable. The nature of external cables isn't weird to me.
 
I would like to see a DFI powerhouse mobo with all the voltage tweaks off the new ATi Chipset.

Im not gonna say i cant trust them. But when it comes to a motherboard... it is the backbone of the system. I always choose the best chipset and a very reliabily mobo company....

Thats why I am sceptiable of ATi.... but I guess we will see soon enough
 
USMC2Hard4U said:
Im not gonna say i cant trust them. But when it comes to a motherboard... it is the backbone of the system. I always choose the best chipset and a very reliabily mobo company....

I feel the same way. But with all the great reviews of it so far.. it should only get better.

Hopefully.
 
if NV wants to completely dominate the chipset market they have to release

Nforce 6+ with soundstorm 7.1 :D
 
USMC2Hard4U said:
I would like to see a DFI powerhouse mobo with all the voltage tweaks off the new ATi Chipset.

Im not gonna say i cant trust them. But when it comes to a motherboard... it is the backbone of the system. I always choose the best chipset and a very reliabily mobo company....

Thats why I am sceptiable of ATi.... but I guess we will see soon enough


You should have a look at the Grouper board being released by Sapphire. White PCB, excellent overclocking (4.0vdimm and a lot of other stuff, basically anything DFI does, it does). The mosfets are all grouped together to provide for easy cooling through passive or active air cooling. Also, Dangerden has designed custom waterblocks for the processor, chipset, and thanks to the board design the mosfets as well.

There is a great thread about it over at xtremesystems.


Also, the early problems with the ATi chipset had nothing to do with their northbridge, it had to do with their southbridge, which is why there was slow adoption at first. However, you can use the ULI southbridge or you can use the newly released ATi southbridge which has solved the quirks of the old one.
 
HighwayAssassins said:
That dongle is wack. I like the nVidia Bridge much better, I already have enough wires back there.

eh, i think im gonna like it. The back of my PC is facing a wall and having something to actually be able to see and grab without having to pull the computer out and get a flashlight to mess with the DVI/VGA output is nice. Honostly, if you can complain about that, you werent gonna buy it to begin with no matter what.

Not to start a war or anythin but its a hell of alot better then the stupid ass jumper blocks or mini card that you'd have to switch to enable SLI in and out in the motherboard. That thing is annoying as hell to get at. They should of made it software enable in the first place. Who ever came up with that idea was not thinking at all.


Did anyone else notice that the bottom slave card appears to be the one thats actually displaying the final image as opposed to the top card such as SLI?
 
FanATIc said:
Did anyone else notice that the bottom slave card appears to be the one thats actually displaying the final image as opposed to the top card such as SLI?

How do you know which card is the master/slave?
 
trinibwoy said:
How do you know which card is the master/slave?

I'd assume that the top PCI-E slot would be the one designated to go to 16x for a single card. That to me says its the master slot. I see no reason to call the card that goes into that the master card (which i believe its called anyway). I believe the card would recieve information from a top down basis as well....meaning the highest card up would be the one to, for example, render the first image in AFR. I suppose they could of reversed, i dont know why they would though. Then again that could be a photoshop or someone simply put the dongle in backward. Who knows.
 
I really hope they have a single slot cooling solution. From that pic it doesnt seem that youll be able to add in more than 1 card because of the monsterous coolers :(.
 
quoting this incase it was missed:

ATI will name these cards as X850XT Crossfire edition and XT non Platinum edition will cost $549, for which you will obviously need a valid MasterCard. This card will work with X850XT Platinum edition, X850XT and X850PRO slave cards.

The X800XL Crossfire edition card with 256MB will cost $299 while 128MB card will be priced at $249. This card will work with X800XT Platinum edition, X800XT, X800XL, X800PRO and X800 vanilla slave cards.

Not as sexy as we could dream but nice all the same.
 
If that's the true dongle then that totally kicks ass. That's much more simpler than having to go in the system and do it. Though both are more of a thing you wont change often so I could care less. But I just like the fact that the dongle has the added bonus of being an extender of some sorts.

The results are weird. But we dont have any official and that's from the Inq so who knows.
 
Apon further inspection it appears the bottom card is indeed the master card. Can tell because the master cards only have 2 DVI and no, is it a TV Out? the black circular output i never used before in my life. Interesting indeed.
 
HighwayAssassins said:
That dongle is wack. I like the nVidia Bridge much better, I already have enough wires back there.

Do you hangaround the backside of your computer? The only time I see mine is when I'm hookin somethin up, or takin it apart.
 
Looks like I will hold off on buying an X800XL for a while.


I'll probably get two X800XL 128MB's like mentioned in the article.




When will we see these new chipsets from ATi? I'm guessing the same time the cards come out?
 
bobsaget said:
Looks like I will hold off on buying an X800XL for a while.


I'll probably get two X800XL 128MB's like mentioned in the article.




When will we see these new chipsets from ATi? I'm guessing the same time the cards come out?

Get two 256MBs. The 128MBs will hold back the power. Just because there's two cards does NOT mean that there's 256MBs of memory.
 
Skrying said:
Get two 256MBs. The 128MBs will hold back the power. Just because there's two cards does NOT mean that there's 256MBs of memory.
I know... but I could save 100 bucks.


We'll just have to wait for some benchmarks and prices.
 
bobsaget said:
When will we see these new chipsets from ATi? I'm guessing the same time the cards come out?


Hopefully a launch date will come out of computex, the Inq said that the NDA would expire tomorrow, i dont know if thats worth anything since it is tomorrow now technically. From everything i'v read though tier 1 motherboard companies have the chipsets and completed boards, and are simply sitting on their hands waiting for the go ahead from ATI.
 
FanATIc said:
Hopefully a launch date will come out of computex, the Inq said that the NDA would expire tomorrow, i dont know if thats worth anything since it is tomorrow now technically. From everything i'v read though tier 1 motherboard companies have the chipsets and completed boards, and are simply sitting on their hands waiting for the go ahead from ATI.
That's good to hear.


Hopefully we will see some benchmarks in the next few days? Do you think that's a possiblity?
 
Back
Top