Critique my 120.3 Loop Before I Order

[tenub]

$80.19 - EK Supreme HF Rev 2 Acetal
$69.95 - Swiftech MCP655-B™ 12 VDC Pump Without speed controller
$46.95 - XSPC RS360 BLACK
$14.40 - PrimoFlex Pro LRT Black Tubing - 1/2in. ID X 3/4in. OD (8 feet)
$4.00 - Plastic Tubing Clamps - Black (10 of them, Large Size G)
$3.95 - Antimicrobial Silver Strip (8" Silver Strip)
$11.00 - Bitspower G1/4" Matt Black 1/2" Fitting (4 of them)
$9.90 - YATE LOON 120mm Case Fan - D12SH-12 - High Speed (3 of them)
$0.99 - 1/2" T Line for 1/2" ID Tubing - Black
$11.95 - Dangerden Fillport - Delrin

Total: $267.67

Do I need any fittings for that pump? Anything else I forgot or that doesn't look good?

 

[ilal2ielli]

I'd recommend a Swiftech MCR-320 over the XSPC RS360. The Swiftech will dissipate more heat than the XSPC, and they're just about the same price.

 

[EricFX1984]

res? maybe I messed it? you might need one to run the silver kill strip

 

[SolidBladez]

res? maybe I messed it? you might need one to run the silver kill strip

I think he can coil it up and put in a tube.

However, I would still recommend a reservoir. Makes bleeding 10x easier.

If you have a Amazon Prime account, you can get 10ft of that same tubing for $18.95 shipped.

 

[tenub]

FrozenCPU
$71.95 - EK Supreme HF Rev 2 Acetal

Sidewinder
$65.95 - Swiftech MCP655-B™ 12 VDC Pump Without speed controller
$49.95 - Swiftech MCR320-QP Quiet Power 3X120mm - Matte Black
$22.95 - Swiftech MCRES Micro Revision 2 reservoir

Jab-tech
$14.40 - PrimoFlex Pro LRT Black Tubing - 1/2in. ID X 3/4in. OD (8 feet)
$4.00 - Plastic Tubing Clamps - Black (10 of them, Large Size G)
$3.95 - Antimicrobial Silver Strip (8" Silver Strip)
$11.00 - Bitspower G1/4" Matt Black 1/2" Fitting (4 of them)
$9.90 - YATE LOON 120mm Case Fan - D12SH-12 - High Speed (3 of them)

Sub Total: $254.05

Shipping: $8.24+11.49+7.85 = $27.58

Total: $281.63

And I'll just stick the silver in the reservoir I guess. Anything else? I don't want to have to order something that I forgot and pay more shipping fees. Is 8 feet enough tubing for my loop? 10 clamps? 4 fittings? I don't need 2 more for the pump right? The tubing just slides on and gets clamped down? This is my first water cooling loop by the way. I want to get it right!

 

[vjcsmoke]

You need 8 fittings for the described loop. 2 per piece you're connecting.
example:
cpu block 2x
pump 2x
reservoir 2x
radiator 2x

 

[tenub]

The MCRES Micro should come with the necessary barbs/fittings, no? The only thing I'm uncertain of is the MCP655-B pump. It looks like I should be fine since one of the bullets in the "summary of benefits" states "½" Barb fittings". Anyone with a MCP655-B care to help me out?

Edit: Newegg reviews confirm my suspicion. I should be fine with just 4 extra barbs for the waterblock and radiator since the reservoir comes with them and the tubing should just fit over the pump connections.