crazy incident.

umcpgrad

2[H]4U
Joined
Apr 2, 2004
Messages
2,800
Yesterday, I installed my new processor on my m/b. I had to take out the old processor, therefore taking out the heatsink and fan. I used the screwdriver and push down on the heatsink and pop it out. Somehow, the screwdriver slipped and it chipped off something on the motherboard!!!!! But thankful everything is fine.. after I installed the new proc and heatsink... but comp system is working kind of funny... :(
 
I've chipped things off motherboards and had them still work before, heh

Next time, put a credit card or something under where you're using the screwdriver.
 
umcpgrad said:
Yesterday, I installed my new processor on my m/b. I had to take out the old processor, therefore taking out the heatsink and fan. I used the screwdriver and push down on the heatsink and pop it out. Somehow, the screwdriver slipped and it chipped off something on the motherboard!!!!! But thankful everything is fine.. after I installed the new proc and heatsink... but comp system is working kind of funny... :(

Some years ago, I was working on a motherboard, and an errant screwdriver bent the pins of one of the chips on the board. I took a magnifying glass and a razor blade and seperated them, everything worked fine.

Later, I had some 2U chassis and dually motherboards to assemble, but the power supplies in the chassis stuck out and would have covered about 3/16" of the corner of the motherboards. There weren't any traces in that corner, so out came the pliers, and off came the corneres. Worked like a charm.

Later still, I was in the data center one night, and ended up having to swap one of those motherboards (from a 4U case) into one of the 2U cases, but all I had was a screwdriver - and needed to break the corner off of the motherboard. It's not all that easy breaking a fiberglass motherboard with your teeth, but it can be done. :D

steve
 
Heh, evey good computer center has a hacksaw and 3lb hand maul handy. Been pretty desperate at times myself but must admit the chewing off the corner of a mother board with ones teeth is world class dedication/resourcefullness. /salute
 
Back
Top