• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Crawl before I can run....

P

Presto88

Limp Gawd
Joined
Sep 19, 2005
Messages
491
I bought an Antec SLK3000B and so far I like it theres just one thing ....the cpu duct included does not adequately cover the cpu.I was thinking about sanding the piece down because it telescopes (the duct) and adding some sort of flexible yet rigid ducting from like a hardware store to make it fit completely over the cpu. So I want to see what you guys would do

BTW I have never modded and this is my first from scratch build PC.

Thanks
 
You don't want the duct comming all the way down to your motherboard, if that's what you were thinking. The duct only needs to come down to the top of your CPU fan. It's there to supply a source of fresh air for the CPU fan, not totaly exclude your CPU from the rest of the inside of your case.
 
No, I did not want to totally exclude it. The purpose of altering the duct would be to get a better "fit" or better position of the duct over the cpu and fan because as is it is off center.

thanks
 
You must log in or register to reply here.
Back
Top