Could I have messed something up by doing this....?

MNiceguy

n00b
Joined
Nov 18, 2008
Messages
2
So this is what I did:

I was swapping in a 4870x2. I meant to shut down Vista but I accidentally clicked sleep instead. I pulled the card that was in there when I suddenly realized that the system hadn't completely powered down. :mad:

I cut power at the PSU switch and finished the task.

Is there any potential for messing something up; even in a minor way? I know there are times when you can damage something but not have a total failure of that part.

I tried looking out there the only thing I've come up with is that this is really no different than powering up with an improperly seated video card which doesn't seem to have any major detrimental effects.

Thanks guys!
 
You may or may not damage anything. I wouldn't be all too worried. At least the GPU was in idle mode hehe. Naw but, just insert the video card again and power up the system.
 
So this is what I did:

I was swapping in a 4870x2. I meant to shut down Vista but I accidentally clicked sleep instead. I pulled the card that was in there when I suddenly realized that the system hadn't completely powered down. :mad:

I cut power at the PSU switch and finished the task.

Is there any potential for messing something up; even in a minor way? I know there are times when you can damage something but not have a total failure of that part.

I tried looking out there the only thing I've come up with is that this is really no different than powering up with an improperly seated video card which doesn't seem to have any major detrimental effects.

Thanks guys!
Anytime I do any sort of hardware swapping, first thing I do is unplug my powercord from my PSU. I'd suggest you take this step in the future to save yourself from some potential headaches :)
 
I'm pretty sure he gets how to handle hardware. If you reread, you'll notice that he accidentally put his computer to sleep and unplugged his hardware in that state, hence his concern over the matter.

You'd probably have noticed any screw ups if something did happen already, so if nothing's gone wrong by now, don't have to lose sleep over it.
 
Thanks guys! I am normally really anal about this kind of thing but this time I was in a hurry. Probably should have just left it until I could devote enough time to doing it right but my impulses got the best of me.

Everything looks OK so far. I seem to be pulling consistent 3DMark scores and I'm not noticing any major adverse effects that fall outside normal driver/game issues.

What would happen if I damaged something? Would it be something obvious like lack of signal to monitor? Sudden change in overall system stability (being as the PCIe is I believe controlled by the northbridge)?

Reason I ask:

If I already haven't made a bad impression I'm about to seal the deal. I was building a rig while I had a friend over. We were joking around, watching TV, etc. I didn't find out until it was too late that I had inadvertently mixed up the Firewire and USB leads to the front panel. While the ports survived (would recognize devices), I got tons of I/O errors and eventually had to replace the motherboard. Needless to say I learned my lesson very, very well and now double-triple check those motherboard headers before I power a new system up.
 
I've accedently pulled components out before while the power was on. I never had any issues.
 
Back
Top