Corsair Vengeance 1866

Can you manually set the RAM to operate with 1.5v in BIOS?

I thought you can adjust your RAM voltage for all of the motherboards nowadays...
 
Your board requires 1.65v? I think 1.65v is the maximum voltage for the board, and it will work with any RAM under 1.65v
 
how about relaxing the ram timing and run it at 1.55v...

that should do the job...

and that is how I found my max ram speed with the relaxing timing...

XMS3 DDR3-1600 7-8-7-20 2T 1.65 manufacture spec...

I am running it at DDR3-2133 9-11-9-28 1T with 1.65v

My ram also works in DDR3-1866 9-9-9-24 2T with only 1.5v
 
ComputerManiac said:
how about relaxing the ram timing and run it at 1.55v...

that should do the job...

and that is how I found my max ram speed with the relaxing timing...

XMS3 DDR3-1600 7-8-7-20 2T 1.65 manufacture spec...

I am running it at DDR3-2133 9-11-9-28 1T with 1.65v

My ram also works in DDR3-1866 9-9-9-24 2T with only 1.5v
Click to expand...

I will give that a shot..Thanks;)
 
1.65v won't kill it but you are best served running the memory voltage at the lowest stable voltage you can find. Work up in small steps from 1.5v and see what you get.
 
You must log in or register to reply here.
Back
Top