core2 duo 6600 OC assistance...

Joined
Mar 16, 2004
Messages
10
ok just set up a evga 680i build using a lot of the parts from the hardocp guide (therlmaltake case corasir psu and a 6600 core2duo)

I bought a scythe infinity and as5 to cool the cpu and got 2*1024 pc6400 corsair memory

- installed windows OK, but Im really concerned with the temps

I tried a modest overclock of 1.3v cpu 333bus but I got 51 C idle and I clicked go on orthos saw temps just to high 70s

is something not right here I thought at least this was a half decent cooler, is nvidia monitor not reporting correctly ?

thanks
 
ok just went back to stock voltage and fsb and temp monitor is showing 48 idle and 72 load with the scythe cooler? something is wrong here ...

I have opended the side of the case and verified the fan on the heatsink is going, now after letting orthos run for 5 mins and nvidia saying the temp is in 70s the heatsink doesnt feel warm at all

this is weird
 
If I were you I'd download TAT and Coretemp and try to see what the temps are again. If they're in the 70's you should probably double check to make sure your heatsink is attached properly.
 
well coretemp shows load at 74 Cat stock speeds... how exactly do I check the install of the heatsink I gotta remove the mobo for this scythe one ?
 
Back
Top