• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Cooling the pump...?

Ghent915

Gawd
Joined
Apr 14, 2005
Messages
974
Hey guys.
I got my W/C rig up and running for the past few weeks, 24/7, with a 100% load on it due to folding. No leaks, so I'm happy.

Anyways, I was tweaking on the inside of my case, and felt the side of my D5 pump. It was a wee touch on the hot side. I was wondering, short of an immersion pump, has anyone pondered a mechanism to cool the pump itself?

It seems to me that the pump is one of the most vital components of the system. Keeping it cool would go a long way to increasing it's lifespan (not that we really worry about that..), and also dump less heat into the flow.


-Ghent
 
It would be a waste if time. D5 is already rated for 50,000 hours mtbf. Plus their heat output is very small.
 
I wouldn't worry about it much, but you could just cool it a little by putting it in front of a case fan. In both my cases the pump is sitting by a 120mm fan............. :eek: They don't even feel warm to the touch............... :D
 
I guess it's just in my nature to slightly over-react. LOL!
I suppose I'll just have to turn my front case fans back on then.
Thanks for the advice guys.

I guess this falls into the area of questionable gains, much like NB coolers, or whatnot.

-Ghent
 
Even though you're water cooling, you still need to have case fans to cool the inside of your case and all the other parts that aren't water cooled. So a few well placed low RPM fans are a good thing.
 
Back
Top