Cooler Master Unveils Sniper Chassis

Terry Olaes

I Used to be the [H] News Guy
2FA
Joined
Nov 27, 2006
Messages
4,646
Hexus has a preview of Cooler Master’s new gamer-inspired case, the Sniper. Follow the jump for pics and specs of the new chassis, which was introduced at Games Convention in Leipzig, Germany. Looks like an Antec case to me with all that mesh.

The monstrous chassis looks like something of a mix between a Cosmos and a Stacker. The mesh front and sides make it practically see through, bringing a whole new meaning to air flow - and, dust, we might add. It isn't by any means sophisticated, but it does have that "gamer" feel to it. Though, those horrible feet must go.
 
+2 for being ugly.

You need style then performance. What do they think this is, the 90's?
 
Looks like an Antec 900 with a better front setup and lack of Rubber feet.
 
If it is inspired by gamers they had a long and hard day. There heads must have been spining around from playing to much on the computer. Shure is a dizzy looking chassis.

:D:eek:
 
Yuck. I can't even pick out one redeeming quality of that exterior beyond the color. I've seen some ugly cases, but that thing takes at least a piece of the cake.
 
If it is inspired by gamers they had a long and hard day. There heads must have been spining around from playing to much on the computer. Shure is a dizzy looking chassis.

:D:eek:

No kidding. I'd like to know what gamers helped design that so that they could be slapped upside the head.
 
Ah! My dryer needs a new lint trap. Gonna call CoolerMaster, brb.
 
Not only is it fugin ugly, but also horribly impractical. That mesh is going to get dusty pretty quick. Sure you could wipe it with a wet cloth, but that isn’t going to clean the stuff between the holes.

After cleaning the grates on the sides of Cisco switches, trust, there is NO way to actually make it look clean besides submerging it in water or spraying it down.

Compressed air might remove most of the dust, but won’t restore its initial dark black look (which is still just nasty).

So, if anyone actually thinks it looks cool (not seen anyone yet), make sure you would like it after it turns into a fuzzy grey case.
 
So many ugly cases coming out lately. Who the hell buys all these ugly things?

Yea really.

Personaly can't stand the front ports being exposed like that either. I prefer a little flap with usb and now adays an esata port. That is it. I don't even want the audio ports.
 
Screw thermaltake. After three emails to them requesting a simple parts replacement they have yet to respond in any way shape or form. I'll take my business somewhere else, like antec, that gives great customer service.
 
someone needs to do a [H] special edition case where its had alot of input from people on here.. could have alot of potential lol

back on topic.... that thing looks crap:eek:
 
Oh god. The hideousness of that case will haunt my dreams. :eek:
 
someone needs to do a [H] special edition case where its had alot of input from people on here.. could have alot of potential lol

back on topic.... that thing looks crap:eek:

If Antec would listen to me, the P190 could be tweaked to be the perfect steel case, and a couple of minor tweaks to the TJ-09 and Silverstone could have the best aluminum case.

Granted I'm talking from a purely functional standpoint and a build perspective, the looks are of course subjective.
 
CM is taking the 690 chassis and using that. IMO its not a bad case at all. 2 200mm fans plus a 120mm which should mean if you use quality fans should equal a well ventilated and quiet case. Dust will be an issue, but I do like this case. Its function and if cheap enough, it should sell.
 
"Fuglyness" is in the eye of the beholder. Personally, I wouldn't have it if you paid me to take it. However, I can see where it would appeal to a lot of people.

Now, the new HAF 932 on the other hand...it's just a shame that they didn't go with the black interior on that rascal too.
 
Thermaltake SPEDO case....presentation.

http://www.youtube.com/watch?v=wufF59sdljU

Watch for EPIC FAIL @ 1min mark.


That guy showing off the case looks to me like he was hired for the show
and had minimal training or time with any of their product. I certainly wouldn't
want him speaking or presenting anything I sold if I were Thermaltake.

A lot of the help at big conventions/trade shows is hired in a few days before
via an employment service, given a few hours of training and thrown onto the
show floor.

I know it may be a cheap way to have people to watch over, give out
pamplets, as well as answer basic questions about product, but it
doesn't look good on the company imo.

I'll wait for some reviews of the case to make up my mind about it. I do
admit the section of the case for video/expansion card cooling and the
storage trays looks nice but flimsy. :rolleyes:
 
Obviously meant to compete with the Antec 900. I think it loses.
 
Let's add a knob that looks like a scope adjustment and paint it black.

Genius.
 
I like it pretty well - I would probably use this for a future build. I'm liking my 690 quite a bit so far, and this seems to make a few improvements in the switches, top i/o panel, and interior drive mounts. the case has a cool military look that will probably appeal to sci-fi/horror/fps players - Union Aerospace Corporation style ftw!

I agree that the mesh side panels could be problematic - this case should come with a complimentary air compressor for cleaning these things out. also, what do all those holes do to the air-flow pattern?? I could see adding some acrylic sheets underneath the mesh in a few strategic places to keep the air moving...
 
Looks like a ripped off antec 900 but made cheaper. Some cool things as the hard drive trays, but that pretty much stops there IMO.
 
Not only is it fugin ugly, but also horribly impractical. That mesh is going to get dusty pretty quick. Sure you could wipe it with a wet cloth, but that isn’t going to clean the stuff between the holes.

After cleaning the grates on the sides of Cisco switches, trust, there is NO way to actually make it look clean besides submerging it in water or spraying it down.

Compressed air might remove most of the dust, but won’t restore its initial dark black look (which is still just nasty).

So, if anyone actually thinks it looks cool (not seen anyone yet), make sure you would like it after it turns into a fuzzy grey case.

The price of the case includes a one year, free, on site cleaning contract with Merry Maids.:D
 
There seems to be an industry design shift toward large knobs. Check out the new Sidewinder keyboard from MS.

Maybe they're watching too much Strange Brew, eh? What a bunch of hosers! :D
 
They hired Flint Fireforge. You know how he likes to call kender doorknobs.
 
Uhhh....looks like an Antec 1200 bumped uglies with a Stacker, and here's the stunted runt result.
 
Back
Top