Cool 'n Quiet problems

Mr. D.

Weaksauce
Joined
Apr 21, 2004
Messages
125
I have the Asus A8N-SLI (see sig) with a 3200 winny. When I enable the Cool 'n Quiet function in the BIOS, the CPU clocks down nicely to 1000MHz. The voltage also goes down to 1.24V. But when I start a game it doesnt clock back to 2000MHz. Is this a A8N-SLI bios problem or a driver problem?

I installed the AMD64 drivers that came with the board.
 
double check your power settings
XP or 2K?

Also what are you using to check clock speed? MBM doesn't work right and doesn't update enough

Also, clock wont go up if it doesnot need too, only CPU intensive games will speed it up
 
Is Cool and Quiet at all effected by CPU Fan stuff? IE, the fan on my XP-120 isn't seen by the BIOS. Will Cool and Quiet still work ok?

-zac
 
pr0zac said:
Is Cool and Quiet at all effected by CPU Fan stuff? IE, the fan on my XP-120 isn't seen by the BIOS. Will Cool and Quiet still work ok?

-zac

cool n quiet will control the fan if its a 3 header plug in.
even if not, the cpu will still slow down and voltage will drop
 
I am using MBM. I know that MBM may not show the correct speeds but when I run 3dmark I get lower scores with CnC enabled than with CnC disabled.

I am using XP
 
It is a driver problem. Upon loading the Cool & Quiet driver, it warns of this potential problem.
 
MBM has an option to re-test the CPU. If you were to start MBM, the processor would hit full speed while it starts, and would report this speed, then once everything has died down, it'll drop back to low speed. But MBM only tests at start by default. There is an option to change this (Retest after start: No. Of Seconds iirc). Whether it can repeatedly test, I can't remember.

CPU-Z refreshes it's screen quite often, wouldn't this be a better tool for the job?
 
Yes it would. However, it cant display the data on my crystal fontz LCD. MBM can
 
Back
Top