• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Convert Primise u133 to RAID

S

s10010001

Supreme [H]ardness
Joined
Sep 17, 2002
Messages
7,505
Anyone have a link or know how off hand to mod a Promise u133 controller card to a u133 RAID…Or u100 to U100 raid I think it’s the same card…
 
The only card I know where this worked was the U66>>>Fastrack hack. Flash Ultra BIOS to Fastrack, solder 100 ohm resistor between pin 16 and 23 on the controller chip and you are done. Have no clue whether it works on later cards. Had that hacked card on my old Celeron 300/450-BX6-II for a long time.
 
looking at the Maxtor u133 controller i have, and comparing it to the TX200 on promise's site, its look likt the exact same thing, to make it more intresting to me, they do not have a u133 controller. Since im not useing it anyway, im going to try to flash it to a TX20000 BIOS as is...

Mabey it will work mabey it wont.... who knows..
 
You must log in or register to reply here.
Back
Top