Confirmed working Q6600/8GB build

zapotec

n00b
Joined
May 16, 2006
Messages
30
Probably the 10 millionth Q6600 build, but it works for me:

Q6600 G0 from Fry's @ 3.5ghz
+ 38C idle, 59-64C peak
Noctua NH-U12P Quiet CPU Cooler with 120mm Vortex Control Fan ($63 from Quiet PC USA), used the included thermal paste
DFI LP LT P35 T2R LGA 775 Intel P35 Intel Motherboard
8GB of GeIL 4GB(2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 @ 2.15V
EVGA 8800 GTS 512MB @ 740/997mhz, could probably go higher
Western Digital WD6400AAKS and older drives: 2x320GB
Seasonic S12 500W (from 3 years ago)
some old quiet Antec case with new fans:
FAN SCYTHE|S-FLEX SFF21D(800rmp) RT

Sound: a USB headphone amp from Meier Audio (hurray for lack of driver hell)
Keyboard: IBM SpaceSaver II, because I hate number pads
Mouse: G9 on a Func Archetype, though the cord clip is now useless due to the stiff G9 cord.
OS: Server 2008 64-bit, also running Ubuntu 64-bit on 4 cores (Hyper-V). Page file in memory.

I updated BIOS and installed chipset drivers, along with the 169.NN Forceware for 64-bit Vista. OCCT is stable for 1 hour, not really bothering with anything else.

Thanks to this forum for all the helpful posts.

Edit: one thing that isn't working with 2008: SetPoint
http://forums.logitech.com/logitech...ftware_mice&message.id=10213&jump=true#M10213

But, I'm using x-mouse button control which has never let me down.

cpu-z-1.png


mem.png


usage.png
 
18 MB free memory. I always figured it would hit some break point where it gave up caching stuff into the system RAM, guess not :p
 
You're not going to like the "cable mangement"

DSCF0014-1600x1199.jpg


I should just disconnect the floppy.
 
lol, if you're not using it, you might as well.

that case isn't that old, but still kinda old i guess. i have its predecessor, SLK3700AMB, in bronze. I was about to get the black version when it came out but picked up the P160 instead.
 
Back
Top