Computer wont turn back on.

GooG

Gawd
Joined
May 25, 2005
Messages
925
Ok so my emachines was working perfectly, then we moved it and now it wont boot. It turns on, fans/lights come on and it wont load windows. The screen says check connection with computer, monitor is fine. The light in the front is orange, i think it usually turns green.

Any suggestions?
 
Open it up, unplug everything, pull all the cards, reseat them, plug everything back in.

It's a bit excessive, but you said you moved it, so I imagine something may have got loose, and it's very difficult to guess just what.
 
did a video card aux power connector get knocked out?


wait.. the light on the monitor is orange? thats means its on stand-by, check to see if the input was changed. maybe the input selection button was pressed when you were moving the stuff, so its on VGA instead of DVI (or vice versa)

that seems like its yer problem.

if not, make sure that the plug between the monitor and computer are secured. if you computer has 2 DVI or VGA ports, try using the other one. (could be a defective port)


edit: i HIGHLY doubt its something internal.
 
edit: i HIGHLY doubt its something internal.

Yeah... cuase the odds of something coming loose whilst moving your machine are like.....well it's just simply not feasible to think that a card could have been jarred loose...../sarcasm....

As advised above, re-seat everything and check all your internal connections and make sure that everything is snug.
 
i reseated everything and tryed to clear cmos. No luck.

I believe its in stand by aswell, ill try the other mentioned solutions aswell.

It has onbaord graphics, so its not that, anyone else?
 
Back
Top