Computer won't start

Overk1ll

n00b
Joined
Nov 4, 2003
Messages
10
I was using my computer and it froze. Since then I haven't been able to start it. A few times it started and said that the cpu clock settings were wrong. I reset them and the computer would beep when it started up. Now the computer won't even power on when I press the button. Which hardware do I need to replace?
 
have you reseted the BIOS? IF not do that, turn off the power fully ( pull the power cable out) while its out, press the power button a couple of times. put the reset jumper back on and try it out. If that still doesn't work, try to change the RAM onto different dimms and try.
 
I tried a different motherboard withoutany other components and it worked. Then I put back in my current motherboard and recent the jumper settings. The error code said FF (I have an epox 8rda+) which in the manuals says there is a problem with the mainboard. After that i plugged in the video card and the fans and it wouldn't boot again. Is it only the motherboard that's causing the problem? Is there a way to fix it?
 
Back
Top