Computer wont start

  • Thread starter Deleted member 21895
  • Start date
try shorting the green and black pins for the motherboard on the PSU and see if it's dead or not.
 
aside from doing that, complete non-postage, is often a sign of toasted ram. if you have one stick in there, it could just be fried. try another.

but I need more info:
system specs?
any overclocks?
 
Follow the wires from the front power switch to where they connect on the motherboard.
They will end with a 2 pin connector.
Momentarily short those 2 pins only, very carefully with a screwdriver and hopefully the PC will turn on.
If so your power switch isnt working.
 
if not, its probably the psu. it could also be the mobo, cpu, or ram. try another psu (borrow a friends), and only plug in the mobo, no drives, and see if it posts (unplug anything not essential for the system to POST, eg sound card, modem, wifi card, hdd, etc). You may also want to pull it out of the case if it still wont power on (something may be shorting it out).
 
I know this might sound a little obvious, but have you tried clearing your cmos? Certian things have to happen before your machine will post, and if the cmos is f'd it can cause some problems.
 
i'm having, i believe, the exact same issue, with my dell 8400. And I realize this is and old thread from a month ago heh, but just started having the issue on my dell after building my new comp. My problem started after having the computer unplugged for about a week, worked perfectly beforehand...

With mine, power it on, cpu fan spins up, but no post, beeps, anything. The light on the mobo does light up also. Whenever I clear the cmos, the cpu fan and power supply fan spin at 100%, after doing this about 10 times, a constant beeeeeeep----beeeeeeeep happened maybe 3 times. Fans keep spinning at 100% until powered down, then when I power on the next time, fans spin up normal.

I tried removing every thing(vid card, sound card, hard drives, ram) and still exact same happens. Same happens if I unplug the power to the cpu fan, still powers up, heatsink warms up alittle(only left it on for about a minute this way), so the cpu does seem to be running..

pretty much lost as to what to do next, dont have another power supply that I can put in there, new one is already seated into my current computer. Aside from just scrapping it, any other suggestions?
 
well, if i could poke around with it i bet i could fix it. alas i have not yet mastered the art of teleportation.

so, since its a dell...
put that extra money you spent on it (instead of BYI) to work! contact them, "i've tried everything obvious, the thing wont start, it wont even post. send a replacement please, or give me an rma ticket or something"

as much as i hate dell, they do have a half decent (note: NOT comptent for advice... I've got a good story but basically the only thing the guy could think of it "is it plugged in?"). support team. if nothings overclocked, your not going to have any problems.

and uhh, fyi, its not DDR 3200, that would imply 3.2Ghz ram :eek: :cool: . Its PC3200, DDR400. completly standard stuff. because we've been using DDR 400 for so long its gotten pretty good. super low timings while maintaining good stabillity. If its dell i think its samsung ram, iv got some of that, managed to lower the cas from 5 to 2.5 :cool: .
 
Back
Top