So here's what happened:
I finally got around to installing the Accelero x2 for my x1950pro, and all seemed ok... I ran 3dmark06 with the new catalyst 7.5 just to stress it and see how hot the temps would get. I came back upstairs to a blank screen and my monitor was in power save mode, it couldn't detect a signal. That's weird I thought, but the computer was still on, so I powered it off. Turned it back on, things seemed normal.
Then today, I go to try far cry with the 64-bit patch, and after about 30 seconds of play, I get a blank screen. Try this again after a reboot, another blank screen. I thought maybe it was the 7.5's, so try again with the old 7.4's. I get the same thing.
I thought maybe it was a temp thing, and maybe my load temps were getting insanely high. So I download the folding gpu so I can monitor the temps. Just as the folding starts, I get a blank screen. Now I go to turn off my computer and turn it on again, and trouble starts. I notice nothing is showing up on the screen, so I'm like WTF? I look down at my computer, and it appears to be shutting on and off repeatedly.
Since I thought this was a video card problem with the new cooler, so I get the computer downstairs and take the video card out, the cooler looks ok, so I remounted it. Without the gpu in the case however, I boot the computer. Again it just turns on for about 2 seconds, fans spin up, and then powers down. It just does this constantly, on, off, on, off, etc...
So I don't know what to do, I think it must either be the power supply or the motherboard. When my roomate gets back I will try his power supply and see what happens, but till then... Anyone have any ideas to what the problem might be?
Thanks!
I finally got around to installing the Accelero x2 for my x1950pro, and all seemed ok... I ran 3dmark06 with the new catalyst 7.5 just to stress it and see how hot the temps would get. I came back upstairs to a blank screen and my monitor was in power save mode, it couldn't detect a signal. That's weird I thought, but the computer was still on, so I powered it off. Turned it back on, things seemed normal.
Then today, I go to try far cry with the 64-bit patch, and after about 30 seconds of play, I get a blank screen. Try this again after a reboot, another blank screen. I thought maybe it was the 7.5's, so try again with the old 7.4's. I get the same thing.
I thought maybe it was a temp thing, and maybe my load temps were getting insanely high. So I download the folding gpu so I can monitor the temps. Just as the folding starts, I get a blank screen. Now I go to turn off my computer and turn it on again, and trouble starts. I notice nothing is showing up on the screen, so I'm like WTF? I look down at my computer, and it appears to be shutting on and off repeatedly.
Since I thought this was a video card problem with the new cooler, so I get the computer downstairs and take the video card out, the cooler looks ok, so I remounted it. Without the gpu in the case however, I boot the computer. Again it just turns on for about 2 seconds, fans spin up, and then powers down. It just does this constantly, on, off, on, off, etc...
So I don't know what to do, I think it must either be the power supply or the motherboard. When my roomate gets back I will try his power supply and see what happens, but till then... Anyone have any ideas to what the problem might be?
Thanks!