Computer Stuck in Reboot Loop, Please Help

Xvash2

Limp Gawd
Joined
Dec 14, 2006
Messages
300
I was installing some Logitech drivers off their disc for my webcam, and it required me to restart my computer. It restarted, and now it reaches the desktop, blue screens to something that flashes for a moment (impossible to read) and reboots. Anybody have any ideas what to do?
 
Hit F8 during the boot process, just after the bios screen, I start tapping it every second or so, and select the Last Known Good Configuration mode at the text menu...may not be the exact text, but that should fix ya.
 
Then I'd say the next step is to boot in safemode and remove the program. If that doesn't work, time to use a system restore point.
 
I tried to remove it in safemode, but it doesn't work.

Crap....

System restore wipes the drive, right?
 
1. Press Windows Key +Pause/Break Key to open the System Properties dialog box or right click My Computer-->Properties.
2. On the Advanced tab, click the Settings button in the Startup And Recovery section.
3. In the System Failure section, uncheck the Automatically Restart check box, and click OK.
4. To enable the changes, click OK in the System Properties dialog box.

This causes the system to halt after encountering a system failure error, which allows you to investigate the problem error in more detail. You'll then have to manually restart the system.

NOTE: You'll have to work quickly to disable the feature before the system reboots. Safe Mode would probably be your best bet.
 
I solved that, I forgot to note.

But the blue screen only says "Your disk space may be full up(which its not, I've only used 124gb worth) and then it goes on to say "Start in Safe Mode"
 
Back
Top